Makita ML180 Owners Manual - Page 5

For USA only Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center Ni-Cd or b). Take the battery to your nearest Makita Authorized Service Center or Distributor that has been designated as a Makita battery recycling location. • Call your nearest Makita Service Center or Distributor to determine the location that provides Makita battery recycling. See your local Yellow Pages under ''Tools-Electric''. OPERATING INSTRUCTIONS Charging Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it from the flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery cartridge into the flashlight all the way until it locks in place with a little click. (Fig. 1) NOTE: Battery cartridges 1200, 1200A, 1202, 1202A can be used on ML120 if you install the set plate. Install the set plate on ML120 with the screw provided as shown in Fig. 2. The following tables indicate the operating time on a single charge. ML120 Voltage 12 V Battery cartridge 1200 1220 1200A 1202 1222 1202A 1233 1234 1235 1235A Operating time Approx. 110 min. Approx. 160 min. Approx. 190 min. Approx. 220 min. Approx. 260 min. Charger DC1201, C1470, DC1411, DC1422, DC1439, DC1801 DC1201, DC1411, DC1422, DC1439, DC1801 DC1411, DC1422, DC1439, DC1801 (Note) If you use a power checking battery on Model ML120, the power checking battery will not indicate the remaining battery capacity properly. ML140 Voltage 14.4 V Battery cartridge 1420 1422 1433 1434 1435 Operating time Approx. 110 min. Approx. 160 min. Approx. 190 min. Approx. 220 min. Approx. 260 min. Charger DC1470, DC1411, DC1422, DC1439, DC1801 DC1411, DC1422, DC1439, DC1801 DC1411, DC1422, DC1439, DC1801 5