Makita ML903 Owners Manual - Page 6
Maintenance, Accessories - battery
View all Makita ML903 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ML902 Voltage 9.6 V Battery cartridge 9000 9002 9033 Operating time Approx. 160 min. Approx. 230 min. Approx. 260 min. Charger DC9710, DC9711, DC1201, DC1411, DC1439, DC1470, DC1422, DC1801 DC9711, DC1201, DC1411, DC1439, DC1422, DC1801 DC9711, DC1411, DC1439, DC1422, DC1801 Storing battery cartridge Always charge the Nickel Metal Hydride battery cartridge before storing it when you do not use it for more than six months. Head angle (Fig. 5) The head angle can be adjusted in four stages. Adjust as desired. Replacing bulb (Fig. 6 & 7) CAUTION: The bulb is very hot immediately after operation. Wait until the bulb cools off before attempting to replace it. First, turn the ring counterclockwise and remove the reflector. Remove the bulb holder by turning it counterclockwise. Then replace the bulb. Shoulder strap (Fig. 8) Install the strap on the tool. MAINTENANCE To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center. ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. • Bulb set (2 pcs) • Shoulder strap • Set plate (For Model ML903) 6