Makita PW5001C Owners Manual - Page 7

FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 1 2 3 1. Pilot lamp 2. RESET(R)Button 3. TEST(T)Button 004728 Ground Fault Circuit Interrupter Connect the tool to a power supply and test the Ground Fault Circuit Interrupter (GFCI) before using the tool. Push the RESET (R) button and confirm that the pilot lamp lights. Push the TEST (T) button and confirm that the pilot lamp goes out. Push the RESET (R) button again to use the tool. WARNING: • Do not use the tool if the pilot lamp does not go out when the TEST (T) button is pushed. 1 1. Shaft lock 006097 Shaft lock CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Press the shaft lock to prevent spindle rotation when installing or removing accessories. 1. Slide switch 006098 Switch action CAUTION: • Before plugging in the tool, always check to see that the slide switch actuates properly and returns to the "OFF" 1 position when the rear of the slide switch is depressed. • Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool. To start the tool, slide the slide switch toward the "I (ON)" position. For continuous operation, press the front of the slide switch to lock it. To stop the tool, press the rear of the slide switch, then slide it toward the "O (OFF)" position. 7