Makita SK104Z Makita SK104Z Instruction Manual - Page 7

Checking the accuracy of the horizontal line: Checking the accuracy of the vertical line: max. 3 mm max. 2 mm 5 m 1.5 m Place the Lock switch 3 in the "Unlocked" ( ) position. Position the instrument approx. 5 m away from the wall. Direct the instrument at the wall and switch on with the On/Set key 1. Activate the laser line with the On/Set key 1 and mark the intersection point of laser crosshairs on the wall. Swivel the instrument to the right and then to the left. Observe the vertical deviation of the horizontal line from the marking. If the difference does not exceed 3 mm, then the SK104 is within tolerance. Place the Lock switch 3 in the "Unlocked" ( ) position. As reference, use a plumb-bob and attach it as close as possible to an approx. 3 m high wall. Position the instrument at a distance of approx. 1.5 m from the wall at an elevation of approx. 1.5 m. Direct the instrument at the wall and switch on with the On/Set key 1. Activate the laser line with the On/Set key 1. Rotate the instrument and align it with the bottom of the plumb line. Now read off the maximum deviation of the laser line from the top of the plumb line. If the difference does not exceed 2 mm, then the SK104 is within tolerance. Makita SK104 7 Operation en GB F I E P NL DK S N FIN J CN ROK PL HR H RUS CZ GR LT LV EST SLO SK M TR