Makita TD090DW Owners Manual - Page 2
SPECIFICATIONS, General Power Tool Safety, Warnings, Save all warnings and, instructions for future - model
View all Makita TD090DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ENGLISH SPECIFICATIONS Model TD090D Machine screw 4 mm - 8 mm Capacities Standard bolt 5 mm - 14 mm High tensile bolt No load speed (min-1) 5 mm - 10 mm 0 - 2,400 Impacts per minute 0 - 3,000 Overall length 155 mm Net weight 0.92 kg Rated voltage D.C.10.8 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END004-2 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ・ Read instruction manual. ・ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE033-1 Intended use The tool is intended for screw driving in wood, metal and plastic. ENG102-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-2: Sound pressure level (LpA) : 92 dB(A) Sound power level (LWA) : 103 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection ENG205-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-2: Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 10 m/s2 Uncertainty (K) : 1.5 m/s2 ENH102-7 EC-DECLARATION OF CONFORMITY Model; TD090D We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014 in accordance with Council Directives, 2004/108/EC, 98/37/EC. CE2007 000230 Tomoyasu Kato Director Responsible Manufacturer: Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN Authorized Representative in Europe: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND GEA006-2 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2