Makita XHU08T XHU07 XHU08 Instruction Manual - Page 14

Storage The hook hole in the tool bottom is convenient for hanging the tool from a nail or screw on the wall. Attach the blade cover to the shear blades so that the blades are not exposed. Store the tool out of the reach of children. Store the tool in a place not exposed to moisture or rain. 5. Set the angle of a file to 45°, and grind the upper blade from 3 directions with the file. 1 1 ► 1 . Hole Grinding the shear blades NOTICE: If the shear blades have considerably deformed by grinding, replace the shear blades with new ones. 1. Install the battery cartridge to the tool. 2. Turn on and start the tool so that the upper blade and lower blade are positioned alternately. 2 ► (1) File (2) 45° CAUTION: Before grinding the shear blades, make sure that the tool is switched off and the battery cartridge is removed from the tool. 6. Place the tool upside down, and then remove the burrs from the shear blades with the file. 1 3. Turn off the tool and remove the battery cartridge from the tool. 4. Remove the screw, and then remove the branch catcher. ► 1 . File 7. Set the angle of the file to 45°, and grind the lower blade from 3 directions with the file. 8. Return the tool to normal position, and then remove the burrs from the shear blades with the file. 9. Attach the branch catcher by tightening the screw. 1 2 ► 1 . Screw 2. Branch catcher 14 ENGLISH