Makita XLC04ZBX4 XLC04 Instruction Manual - Page 7

Lighting up the lamp CAUTION: Do not look in the light or see the source of light directly. To turn on the lamp, push the ON/speed change button. Push the OFF button to turn off the lamp. During the tool actuating, the lamp turns on. When the remaining battery capacity gets low, the lamp starts blinking. Prefilter or high performance filter and HEPA filter 1 2 4 1 3 3 2 ► 1 . ON/speed change button 2. OFF button 3. Lamp NOTE: The timing, at which the lamp starts blinking, depends on the temperature at work place and the battery cartridge conditions. ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Parts description Optional accessory High performance filter and stay and sponge filter ► 1 . Capsule 2. Prefilter 3. High performance filter 4. HEPA filter NOTICE: Do not use the high performance filter with the filter (optional accessory). The high performance filter may become unremovable from the cleaner. NOTE: When using the optional prefilter and filter with the HEPA filter, use only the prefilter over the HEPA filter. If you use prefilter and filter with the HEPA filter at the same time, the suction power may be reduced. NOTE: When using the HEPA filter with the high performance filter, use the high performance filter with the stay. 1 ► 1 . Stay 1 2 3 ► 1 . Capsule 2. High performance filter 3. Stay and sponge filter 7 ENGLISH