Makita XML08Z XML06 07 08 Instruction Manual - Page 6

Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery cartridge cool down before charging it. 4. Charge the battery cartridge if you do not use it for a long period (more than six months). ASSEMBLY 2. )LUPO\WLJKWHQEROWVZKLFKZHUHWHPSRUDULO\ tightened in step 1 using box wrench 13. 3. Align the hole in the lower handle with the hole in the upper handle, then insert the bolt from inside, and then tighten the nut from outside with box wrench 13. Perform the same procedure on the other side. 1 5 4 3 2 WARNING: Always be sure that the lock key and battery cartridge are removed before carrying out any work on the mower. Failure to remove the ORFNNH\DQGWKHEDWWHU\FDUWULGJHPD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\IURPDFFLGHQWDOVWDUWXS WARNING: Never start the mower unless it is completely assembled. Operation of the machine LQDSDUWLDOO\DVVHPEOHGVWDWHPD\UHVXOWLQVHULRXV SHUVRQDOLQMXU\IURPDFFLGHQWDOVWDUWXS Installing the handle NOTICE: When installing handles, position the cords so that they are not caught by anything between the handles. If the cord is damaged, the mower switch may not work. 1. Align the holes in the lower handle with the holes LQWKHPRZHUERG\DQGWKHQWLJKWHQEROWVWHPSRUDULO\ Ź1 . Bolt 2. Lower handle 3. Nut 4. Hole 5. Upper handle CAUTION: +ROGWKHXSSHUKDQGOH¿UPO\VR WKDWLWGRHVQRWGURSRႇ\RXUKDQG Otherwise, the KDQGOHPD\IDOODQGFDXVHDQLQMXU\ 4. Attach the holders to the handle. Align the protrusions on the holder with the holes on the KDQGOHVRWKDWWKHSURWUXVLRQV¿WLQWKHKROHV3RVLWLRQ WKHFRUGVDVVKRZQLQWKH¿JXUH 1 2 1 2 Ź1 . Lower handle 2. Bolt Ź1 . Cord 2. Holder 6 ENGLISH