Makita XRJ05Z XRJ05 Instruction Manual - Page 7

Hook CAUTION: When hanging the tool, set the lock/speed change lever in position to lock 1 the switch trigger. (See the section titled "Switch action" .) CAUTION: Never hang the tool at high or potentially unstable location. 2 3 ► 1 . Blade clamp lever 2. Released position 3. Fixed position Insert the recipro saw blade into the blade clamp as far as it will go. The blade clamp sleeve rotates and fixes the 1 recipro saw blade. Make sure that the recipro saw blade cannot be extracted even though you try to pull it out. ► 1 . Hook The hook is convenient for hanging the tool temporarily. To use the hook, simply lift up hook until it snaps into the open position. When not in use, always lower hook until it snaps into the closed position. 2 1 ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing the recipro saw blade CAUTION: Always clean out all chips or foreign matter adhering to the blade and around the blade clamp. Failure to do so may cause insufficient tightening of the blade, resulting in a serious injury. To install the recipro saw blade, always make sure that the blade clamp lever (part of the blade clamp sleeve) is in released position on the insulation cover before inserting the recipro saw blade. If the blade clamp lever is in fixed position, rotate the blade clamp lever in the direction of the arrow so that it can be locked at the released positon . ► 1 . Recipro saw blade 2. Blade clamp sleeve CAUTION: If you do not insert the recipro saw blade deep enough, the recipro saw blade may be ejected unexpectedly during operation. This can be extremely dangerous. To remove the recipro saw blade, rotate the blade clamp lever in the direction of the arrow fully. The recipro saw blade is removed and the blade clamp lever is fixed at the released position . 2 1 ► 1 . Recipro saw blade 2. Blade clamp lever CAUTION: Keep hands and fingers away from the lever during the switching operation. Failure to do so may cause personal injuries. 7 ENGLISH