Makita XSC02T Makita XSC02M Instruction Manual - Page 6
Functional Description
View all Makita XSC02T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 1. Button 2. Red indicator 3. Battery cartridge CAUTION: • Before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. • Do not pull the switch trigger hard without pressing the lock-off lever. This can cause switch breakage. 2 1. Switch trigger 2. Lock-off lever 1 3 015628 CAUTION: • Always switch off the tool before installing or removing of the battery cartridge. • Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely. CAUTION: • Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. • Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. Switch action 015631 To prevent the switch trigger from being accidentally pulled, a lock-off lever is provided. To start the tool, press the lock-off lever and pull the switch trigger. Release the switch trigger to stop. Indicating remaining battery capacity 1. Battery indicator 1 015642 When you turn the tool on, the battery indicator shows the remaining battery capacity. The remaining battery capacity is shown as the following table. Battery indicator status Remaining battery capacity On Off Blinking 50% - 100% 20% - 50% WARNING: • For your safety, this tool is equipped with lock-off lever which prevents the tool from unintended starting. NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off lever. Return tool to a MAKITA service center for proper repairs BEFORE further usage. • NEVER tape down or defeat purpose and function of lock-off lever. 015624 0% - 20% Charge the battery 6