Makita XT286SM1 XBU03 Instruction Manual - Page 5

Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery cartridge cool down before charging it. 4. Charge the battery cartridge if you do not use it for a long period (more than six months). 2. Make sure that the Makita logo on the front nozzle is facing the direction shown in the figure, and then attach the front nozzle to the machine. 1 ASSEMBLY CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed before carrying out any work on the machine. Installing the front nozzle 1. Loosen 2 screws with the hex wrench, and then pull the screws all the way. 1 ► 1 . Front nozzle 3. Tighten the screws with the hex wrench. 1 1 ► 1 . Screw 1 ► 1 . Screw Installing the flat nozzle or extension nozzle Optional accessory 1. Attach the adapter pipe to the front nozzle, and then turn it clockwise to lock it into place. 2 1 ► 1 . Adapter pipe 2. Front nozzle 5 ENGLISH