Makita XUX01ZM5 XUX01 Instruction Manual - Page 7

Indicator lamps Remaining capacity Lighted Off Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have malfunctioned. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Main power switch WARNING: Always turn off the main power switch when not in use. To stand by the tool, press the main power button until the main power lamp lights up. To turn off, press the main power button again. Switch action WARNING: For your safety, this tool is equipped with lock-off lever which prevents the tool from unintended starting. NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off lever. Return the tool to our authorized service center for proper repairs BEFORE further usage. WARNING: NEVER tape down or defeat purpose and function of lock-off lever. CAUTION: Before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. NOTICE: Do not pull the switch trigger hard without pressing the lock-off lever. This can cause switch breakage. To prevent the switch trigger from being accidentally pulled, a lock-off lever is provided. 1 2 1 ► 1 . Main power button NOTE: The main power lamp brinks if the switch trigger is pulled under unoperatable conditions. The lamp blinks if you turn on the main power switch while holding down the lock-off lever and the switch trigger NOTE: This tool employs the auto power-off function. To avoid unintentional start up, the main power switch will automatically shut down when the switch trigger is not pulled for a certain period after the main power switch is turned on. ► 1 . Lock-off lever 2. Switch trigger To start the tool, turn on the main power switch and grasp the handle (the lock-off lever is released by the grasp) and then pull the switch trigger. Tool speed is increased by increasing the pressure on the switch trigger. To stop the tool, release the switch trigger. Speed adjusting You can adjust the tool speed by tapping the main power button. Each time you tap the main power button, the level of speed will change. 1 ► 1 . Main power button 7 ENGLISH