Marantz DV-12S1 User Guide - Page 23

Using the FL menu The FL menu has been designed to set "TVSYSTEM", "COMP VIDEO", "AUTO P OFF" and "REMOT CODE". The FL menu can not be used if a disc is playing. It is recommended to set the FL menu before loading a DVD. If a DVD has been loaded, be sure to press STOP 7 twice before proceeding. (If "RESUME" is displayed in the FL display, press STOP 7.) Selecting the FL menu Press SETUP for longer than 1 sec. The FL OFF indicator on the player turn on and off. FL menu is displayed in the FL display. DIMMER RANDOM VIDEO ON/OFF DVD PLAYER DV-12S1 OPEN/CLOSE PLAY STOP PAUSE POWER TVSYSTEM STANDBY FL OFF FL menu FL OFF Move the cursor control joystick down to select the FL menu you want as follows. (Example) TVSYSTEM (except for USA model) COMP VIDEO AUTO P OFF REMOT CODE Cursor Control Joystick OPEN/CLOSE POWER DISPLAY F.MEMO VIDEO ADJ. A-B REPEAT PROGRAM ANGLE SUBTITLE AUDIO TOP MENU ENTER MENU RETURN 1 2 SETUP 3 4 5 6 7 8 9 SEARCH 0 +10 ENTER SETUP STOP CLEAR LAST MEMO CONDITION MEMO To exit the FL menu When you have compleated setting up the FL menu or if you want exit the FL menu. Press SETUP to close the FL menu. Setting Up the Player ENGLISH TV SYSTEM setting (except for USA model) Select TVSYSTEM, then press ENTER. Move the cursor control joistick down to select the type of TVSYSTEM you want to set as follows. (Example) TVSYS PAL * TVSYS NTSC TVSYS AUTO * Factory setting Press ENTER you want to set. The menu select is set. Note TV SYSTEM (except for USA model) Video output changes as follows according to the playback disc's recorded format. NTSC = PAL, PAL = NTSC conversion is possible on Video CDs. PAL = NTSC conversion is not possible on DVDs. When the TV SYSTEM is set to the TVSYS AUTO position, the disc's format will be output as is. When a CD or disc is not loaded, the previous video output format will be selected. Disc Output format Type Format Position of TV SYSTEM TVSYS NTSC TVSYS PAL TVSYS AUTO DVD NTSC NTSC MOD. PAL NTSC PAL PAL PAL Video CD NTSC NTSC MOD. PAL NTSC PAL NTSC PAL PAL CD, No disc NTSC PAL NTSC or PAL About MOD. (Modulation) PAL • SHRINK Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage. • If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC = PAL conversion. Note When playing Video CDs, the TV SYSTEM setting has no effect with playback stops. 23