Marantz DV8300 User Guide - Page 16
Getting Started - dvd sacd
View all Marantz DV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4 Getting Started Using the FL menu The FL menu has been designed to set "DISP MODE", "AUTO P OFF" and "REMOT CODE". The FL menu can not be used if a disc is playing. It is recommended to set the FL menu before loading a DVD. If a DVD has been loaded, be sure to press STOP 7 twice before proceeding. (If "RESUME" is displayed in the FL display, press STOP 7.) Selecting the FL menu Press SETUP for longer than 1 sec. The FL OFF indicator on the player turn on and off. FL menu is displayed in the FL display. SACD/DVD PLAYER DV8300 STANDBY POWER ON/OFF FL OFF DISP MODE FLOFF PAUSE STOP PLAY OPEN/CLOSE FL menu Move the cursor control joystick down to select the FL menu you want as follows. (Example) DISP MODE AUTO P OFF REMOT CODE To exit the FL menu When you have compleated setting up the FL menu or if you want exit the FL menu. Press SETUP to close the FL menu. DISP MODE setting Select DISP MODE, then press ENTER. Move the cursor control joystick down to select the type of DISP MODE you want to set as follows. 16 (Example) DISP OFF * DISP ON * Factory setting Press ENTER you want to set. The menu select is set. • If you replay a CD or SACD while DISP ON is selected, FL display and video output shut off automatically. FL display and video output are on during Stop and Pause. And if you push the Dimmer Button on the remote control during DISP ON, for three seconds, only FL display is displayed. AUTO P OFF setting Select AUTO P OFF, then press ENTER. Move the cursor control joystick down to select the type of AUTO P OFF you want to set as follows. (Example) ON 30 MIN * OFF * Factory setting Press ENTER you want to set. The menu select is set. • The standby mode is automatically selected to save power if the player is left in the stop mode for about 30 minutes. REMOT CODE setting Select REMOT CODE, then press ENTER. Move the cursor control joystick down to select the type of REMOT CODE you want to set as follows. (Example) DVD 1 * DVD 2 * Factory setting Press ENTER you want to set. The menu select is set. • The DVD player support two remote control codes: DVD 1 and DVD 2. • Set the remote control code of the Remote Control to the same setting. • See page 14 for more information.