Marantz MM7055 MM7055 User Manual - English - Page 12

ENGLISH Connection to an external control device qwe r q Flasher input connector (FLASHER IN) Used when connecting a control box or other control device to this unit, and using such a device to control this unit. w
DC control output connector (DC CONTROL OUT) Used when connecting a device that has a DC control input terminal to this unit, and linking the power ON/STANDBY function of this device with the power ON/STANDBY of the connected device. An electrical signal of max 12 V/44 mA is output from the DC control output terminal. For details, see the instruction manual of the connected device. NOTE Do not use the DC control output terminal as the power supply for an external device. e
DC control input connector (DC CONTROL IN) Used when connecting a unit that has a DC control input terminal to this device, and linking the power ON/STANDBY of the connected device with the power ON/STANDBY of this unit. For details, see the instruction manual of the connected device. NOTE When a 5 V - 15 V voltage is input to the DC control input terminal, the power of this unit switches ON. However, inputting voltage outside of this range will cause damage to this unit. r
Remote control connector Used when connecting an external control device to this unit, and using the device to control this unit. NOTE When connecting a Marantz AV8003 or AV7005 AV pre-tuner, you can switch the power of this unit to ON/STANDBY together with the AV8003/ AV7005 power supply. For details, see the AV8003 or AV7005 instruction manual. 8