Marantz MM8077 Owner's Manuals - English - Page 12

ENGLISH Connection to an external control device qwe r q Flasher input connector (FLASHER IN) Used when connecting a control box or other control device to this unit, and using such a device to control this unit. w DC control output connector (DC CONTROL OUT) Used when connecting a device that has a DC control input terminal to this unit, and linking the power ON/STANDBY function of this device with the power ON/STANDBY of the connected device. An electrical signal of max 12 V/44 mA is output from the DC control output terminal. For details, see the instruction manual of the connected device. NOTE • Do not use the DC control output terminal as the power supply for an external device. • When using this unit with a device connected to the DC control connector, set the auto standby function to "Off" (vpage 9 "Setting the power to standby automatically (Auto standby function)"). e DC control input connector (DC CONTROL IN) Used when connecting a unit that has a DC control input terminal to this device, and linking the power ON/STANDBY of the connected device with the power ON/STANDBY of this unit. For details, see the instruction manual of the connected device. NOTE • When a 5 V - 15 V voltage is input to the DC control input terminal, the power of this unit switches ON. However, inputting voltage outside of this range will cause damage to this unit. • When using this unit with a device connected to the DC control connector, set the auto standby function to "Off" (vpage 9 "Setting the power to standby automatically (Auto standby function)"). r Remote control connector Used when connecting an external control device to this unit, and using the device to control this unit. NOTE When connecting a marantz AV8801 or AV7701 AV pre-tuner, you can switch the power of this unit to ON/STANDBY together with the AV8801/ AV7701 power supply. For details, see the AV8801 or AV7701 owner's manual. 8