Marantz NA8005 Owner's Manual in English - Page 86
Settings
View all Marantz NA8005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Contents Connections Playback Settings Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to "On" in the default settings of this unit. 0 Set up the IP Address, Subnet Mask, Default Gateway and DNS server information only when assigning a fixed IP address or when connecting to a network without DHCP function. 0 Configure the proxy settings when using a proxy server to connect to the Internet. o DHCP Selects how to connect to the network. On (Default): Off: Configure the network settings automatically from your router. Configure the network settings manually. o IP Address Set the IP address within the ranges shown below. 0 The Network Audio function cannot be used if other IP addresses are set. CLASS A:10.0.0.1 - 10.255.255.254 CLASS B:172.16.0.1 - 172.31.255.254 CLASS C:192.168.0.1 - 192.168.255.254 Settings Tips Appendix o Subnet Mask When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. o Gateway When connected to a gateway (router), input its IP address. o Primary DNS, Secondary DNS If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If two or more DNS are provided by your provider, enter both "Primary DNS" and "Secondary DNS". Front panel Rear panel Remote control 86 unit Index