Marantz NR1402 NR1402N_ENG_GettingStarted_UG_v00 - Page 12
Connect, Connecting the speakers, 1-channel
View all Marantz NR1402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA nnConnecting the speakers The speakers are connected in "2. Speaker Connection" of the Setup Wizard but if you did not use or cancelled the Setup Wizard, connect the speakers as shown below. For details, see the included CD-ROM (Owner's manual). Connect Carefully check the left (L) and right (R) channels and + (red) and - (black) polarities on the speakers being connected to the thiit, and be sure to interconnect the channels and polarities correctly. Connecting the speaker cables Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. 5.1-channel NOTE • Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other (vm page 86 "Protection Circuit"). • Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock. (When the Setup Wizard is running, follow the instructions in the Setup Wizard screen for making connections.) • Use speakers with the speaker impedances shown below. Speaker terminals FRONT CENTER SURROUND Speaker impedance 6 - 8 Ω FL SW FR C SL SR 6