Marantz NR1602 NR1602 Home Theater Receiver - Page 2

NR1602 "Slim-line" Home Theater Receiver Audio Section Receiving Range: 87.5 MHz - 108.0 MHz 522 kHz - 1611 kHz • Power amplifier Usable Sensitivity: 1.2 μV (12.8 dBf) 18 μV Rated output: Front: 50 dB Quieting Sensitivity: MONO 2.0 μV (17.3 dBf) 50 W + 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) STEREO 42 μV (34.5 dBf) Center: S/N: MONO 72 dB (IHF-A weighted, DIRECT mode) 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) STEREO 67 dB (IHF-A weighted, DIRECT mode) Surround: Total harmonic Distortion (at 1 kHz): MONO 0.3 % 50 W + 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) STEREO 0.7 % Surround back: General 50 W + 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) Power supply: AC 230 V, 50/60 Hz • Analog Power consumption: 220 W Input sensitivity/Input impedance: 130 mV/47 kΩ 0.2 W (Standby) Frequency response: 10 Hz - 100 kHz - +1, -3 dB (DIRECT mode) 3 W (CEC standby) S/N: 98 dB (IHF-A weighted, DIRECT mode) For purposes of improvement, specifications and design are Video Section subject to change without notice. • Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ω Frequency response: 5 Hz - 10 MHz - 0, -3 dB • Color component video connector Input/output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω PB / CB signal - 0.7 Vp-p, 75 Ω PR / CR signal - 0.7 Vp-p, 75 Ω Frequency response: 5 Hz - 60 MHz - 0, -3 dB Tuner Section [FM] [AM] (Note: μV at 75 Ω, 0 dBf = 1 x 10-15 W) All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. ©2011 Marantz America, LLC · www.marantz.com