Marantz PM-11S3 PM11S3U_ENG_UG_v00 - Page 16

ENGLISH Starting playback Adjusting the levels Adjusting the tone nnLeft and right channel balance The volume level of the left and right channels can be trimmed in 0.5 dB steps across a 0.0 - 9.0 dB range. When the unit is shipped from the factory, the volume level is set to 0.0 dB (maximum). 1 Press MENU. The unit enters the level adjustment mode. • The left channel level value flashes. nnLow frequency range The low frequency range can be trimmed in 2 dB steps across a -8 - +8 dB range. When the unit is shipped from the factory, the level is set to 0.0 dB. Before making this adjustment, press TONE on the unit or the remote control to set the tone control to on. 1 Press MENU. The unit enters the level adjustment mode. 2 Press ENTER. The adjustment mode selects the low frequency range. nnHigh frequency range The high frequency range can be trimmed in 2 dB steps across a -8 - +8 dB range. When the unit is shipped from the factory, the level is set to 0.0 dB. Before making this adjustment, press TONE on the unit or the remote control to set the tone control to on. 1 Press MENU. The unit enters the level adjustment mode. 2 Press ENTER twice. The adjustment mode selects the high frequency range. 2 Press df to adjust the left channel level. 3 Press df to adjust the level. 3 Press df to adjust the level. 3 Press 1. The adjustment mode selects the right channel. • The tight channel level value flashes. • If not operated for 15 seconds, the current setting is saved and the display returns to normal. • If not operated for 15 seconds, the current setting is saved and the display returns to normal. 4 Press df to adjust the right channel level. 5 Press MENU. The unit exits the adjustment mode. • If you have connected a "SLAVE" device using the F.C.B.S. connection (vpage 14), proceed to the slave setting. NOTE Before making the adjustment for level and tone, press MODE/ AMP to set its control mode to amplifier. 12