Marantz PM6004 User Manual - Page 16
Setting Auto standby mode - headphone
View all Marantz PM6004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH Setting Auto standby mode With the Auto standby mode ON, this unit will automatically enter the Auto standby mode after about 30 continuous minutes of no output from the speakers or headphones. SOURCE DIRECT Press and hold for at least 5 seconds. Auto standby mode is switched between On and Off. Auto standby mode "Off" Power indicator Flashes once Auto standby mode "On" Power indicator Flashes three times NOTE Perform the operation using the buttons on the unit. You cannot perform the operation using [SOURCE DIRECT] on the remote control. • The default setting for the Auto standby mode is OFF. • This unit will automatically enter Auto standby mode after about continuous 30 minutes in the following conditions. • No output from the selected input source. • No operation performed on the remote control. • No operation of , , or . 12