Marantz PM7001 PM7001 User Manual - Page 19
Others, Specifications & Dimensional Drawings
View all Marantz PM7001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH OTHERS The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz component. 7 Cleaning of equipment external surfaces The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft, lint-free cloth. If the equipment becomes heavily soiled: • dilute some washing up liquid in water, in a ratio of one part detergent to six parts water. • dip a soft, lint free in the solution and wring the it is damp. • wipe the equipment with the damp cloth. • dry the equipment by wiping it with a dry cloth. 7 Repairs Only the most competent and qualified service technicians should be allowed to service the factory-trained warranty station personnel have the knowledge and special facilities needed for repair and calibration of this precision equipment. After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation. In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment's behaviour. SPECIFICATIONS & DIMENSIONAL DRAWINGS Power output (20 Hz - 20 kHz simultaneous drive of both channels 70W x 2 (8Ω load 100W x 2 (4Ω load) Total harmonic distortion (20Hz - 20kHz simultaneous drive of both channels, 8Ω load 0.02% Output band width (8Ω load, 0.05 5Hz - 60kHz Frequency response (CD, 1W, 8Ω load) .... 5Hz - 100kHz ±3dB Dumping factor (8Ω load, 20Hz - 20kHz 100 Input sensitivity/Input impedance PHONO (MM 2.5mV/47kΩ CD, LINE, TUNER, AUX/DVD, RECORDER 200mV/20kΩ MAIN IN 1.6V/20kΩ Output voltage/Output impedance PRE OUT 1.6 V/560Ω Maximum allowable PHONO input level (1kHz) MM 130mV RIAA deviation (20Hz ~ 20kHz 0.5dB S/N (IHF-A, 1W, 8Ω load) PHONO (MM 85dB (5mV input) CD, LINE, TUNER, AUX/DVD, RECORDER 88dB (500mV input) MAIN IN 107dB Tone control Bass (50Hz 10dB Treble (20kHz 10dB Power requirement AC 120V 60Hz Power consumption (UL6500 250W (4Ω, 100W x 2 output 470W Accessories Remote controller 1 AA batteries 2 Detachable AC power cable 1 Maximum outer dimensions (Amplifier) Width 17-5/16 ins. (440 mm) Height 5 ins. (126.5 mm) Depth 14-3/8 ins. (364 mm) Weight (Amplifier 23.1 lbs (10.5 kg) Specifications subject to change without prior notice. 15/16 ins. (23.0 mm) 14-3/8 ins. (364 mm) 3/4 ins. (19.0 mm) 17-5/16 ins. (440.0 mm) */5&(3"5&%".1-*'*&31. */1654&-&$503 1)0/0 $% 56/&3 "69%7% 3&$03%&3 45"/%#: 108&30/0'' 1)0/&4 56/&3 3&$ 4&-&$503 0'' $% "69%7% 1)0/0 3&$03%&3 3&$03%&3 $01: 3&$03%&3 3&$03%&3 #"44 53-& #"-"/$& - 3 70-6.& .*/ " 41&",&34 # 0/ 0'' ."9 4063$&%*3&$5 0/ 0'' 11/16 ins. (16.5 mm) 5 ins. (126.5 mm) 15