Marantz SA-15S2B Limited Instruction Manual - Page 20

NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS APPLICATION OPERATION TROUBLESHOOTING ENGLISH ADVANCED CONNECTIONS CONNECTING TO A DIGITAL AUDIO COMPONENT The player has one digital optical output connector and one digital coaxial output connector. You can enjoy digital recording when the player is connected to a CD recorder or other digital recording component. • After connecting, press the DIGITAL OUT button on the remote control while the CD is stopped and set the digital output for the audio CD signal from the DIGITAL AUDIO OUT terminal to ON. Switch the digital output ON and OFF using the button on the remote control. When digital output is switched OFF, "D OFF" lights up on the LDC display. To enjoy better sound quality, switch digital output to OFF when digital output is not in use. Caution: Signals are sent from the Digital Audio Output (Optical and Coaxial) terminals only when playing back audio CDs or the CD layer of Super Audio CDs. There are no signals when other media are being played back. 7 Connecting the optical output connector Use an optical digital connecting cable available on the market. Insert the plug firmly in until it clicks into place. Do not bend or bundle the optical digital connecting cable. 7 Connecting the coaxial output connector Use a coaxial digital connecting cable available on the market. IN OUT IN OUT Optical digital connecting cable (available on market)  Signal flow Coaxial digital connecting cable (available on market) : Signal flow OTHERS ANALOG IN/OUT L R MD INPUT MD COMMON CD OUTPUT DIGITAL IN/OUT OPTICAL MD MD/CD INPUT OUTPUT CD recorder, MD deck, AV amplifier, etc. ANALOG IN/OUT L INPUT R OUTPUT DIGITAL IN/OUT COAXIAL OPTICAL INPUT OUTPUT INPUT OUTPUT EXTERNAL CD recorder, MD deck, AV amplifier, etc. 14