Marantz SA-KI Ruby Owners Manual English - Page 29
Display on this unit shows nothing, No sound comes out, Sound is interrupted or noise occurs,
View all Marantz SA-KI Ruby manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Overview Connections n Display on this unit shows nothing Symptom Display is off. 0 Press the DISPLAY button to turn on the display. Cause / Solution n No sound comes out Symptom No sound is produced. Or sound is distorted. Cause / Solution 0 Check the connections for all devices. 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check the amplifier's functions and controls and adjust as necessary. 0 When connecting to a device with digital audio input connectors, set "Digital Out" to "On". 0 Digital audio output stops when playing the HD layer of a Super Audio CD or a file with a DSD signal or a linear PCM signal with a sampling frequency of 352.8 kHz or higher. 0 If using headphones, check that "Phones" is set to "On" in the menu. Sound is not output through the headphones jack if "Off" is set. n Sound is interrupted or noise occurs Symptom Cause / Solution During playback from the CD-R/CD-RW/ 0 The sound may skip during playback of a CD-R/CD-RW containing a high-resolution audio source. DVD-R/DVD-RW/DVD+R/DVD+RW, sound is occasionally interrupted. 0 This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc. During playback from the USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. Sound is interrupted during playback of 0 Do not start applications other than the player software while playing music on your computer. tracks saved on a computer. 0 The sound may be interrupted depending on the hardware or software configuration of the computer being used. n Desired sound does not come out Symptom Cause / Solution Headphone volume is low. 0 Switch "HP AMP Gain" to "Middle" or "High" if using headphones with high impedance or low sensitivity. ENGLISH Page 11 Page 8 12 - 24 Page - - - - - Page 24 Playback Settings Tips Appendix 28