Marantz SR6005 SR6005 Spec Sheet - Page 2

Home Theater Receiver - specs

Get Marantz SR6005 PDF manuals and user guides View all Marantz SR6005 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

SR6005 Home Theater Receiver AUDIO SECTION • Power amplifier Frequency response: 5 Hz - 10 MHz - +1, -3 dB • Color component video connector Rated output: Front: Input/output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω 110 W + 110 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) PB / CB signal - 0.7 Vp-p, 75 Ω Center: PR / CR signal - 0.7 Vp-p, 75 Ω 110 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) Frequency response: 5 Hz - 60 MHz - +0, -3 dB Surround: TUNER SECTION [FM] [AM] 110 W + 110 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) (Note: μV at 75 Ω, 0 dBf = 1 x 10-15 W) Surround back / Front height: Receiving Range: FM 87.5 MHz - 108.0 MHz, AM 522 kHz - 1611 kHz 110 W + 110 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) Usable Sensitivity: FM1.2 μV (12.8 dBf), AM 18 μV Maximum effective output power: Front: 50 dB Quieting Sensitivity: MONO 2.0 μV (17.3 dBf) 190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.) STEREO 42 μV (34.5 dBf) Center: S/N (IHF-A): MONO 72 dB 190 W (6 Ω, 1 kHz with 10 % T.H.D.) STEREO 67 dB Surround: Total harmonic Distortion (at 1 kHz): MONO 0.3 % 190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.) STEREO 0.7 % Surround back / Front height: GENERAL 190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.) Power supply: AC 230 V, 50 Hz Output connectors: 6 - 8 Ω (SPEAKER A + B : 8 Ω) Power consumption: 650 W • Analog 0.2 W (Standby) Input sensitivity/Input impedance: 175 mV/50 kΩ 3.0 W (CEC standby) Frequency response: 10 Hz - 100 kHz - ±3 dB (Source Direct mode) S/N: 98 dB (IHF-A weighted, Source Direct mode) Maximum external dimensions: 440 (W) x 161 (H) x 389 (D) mm Weight: 11.8 kg VIDEO SECTION REMOTE CONTROL UNIT (RC011SR) • Standard video connectors Batteries: R03/AAA Type (two batteries) Input/output level and impedance: 1 Vp-p, 75 Ω All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. ©2010 Marantz America, LLC · www.marantz.com

  • 1
  • 2
SR6005
Home Theater Receiver
©2010 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
AUDIO SECTION
Frequency response: 5 Hz – 10 MHz — +1, –3 dB
• Power amplifier
• Color component video connector
Rated output: Front:
Input/output level and impedance: Y (brightness) signal — 1 Vp-p, 75
Ω
110 W + 110 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
PB / CB signal — 0.7 Vp-p, 75
Ω
Center:
PR / CR signal — 0.7 Vp-p, 75
Ω
110 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Frequency response: 5 Hz – 60 MHz — +0, –3 dB
Surround:
TUNER SECTION [FM] [AM]
110 W + 110 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
(Note:
μ
V at 75
Ω
, 0 dBf = 1 x 10–15 W)
Surround back / Front height:
Receiving Range: FM 87.5 MHz – 108.0 MHz, AM 522 kHz – 1611 kHz
110 W + 110 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Usable Sensitivity: FM1.2
μ
V (12.8 dBf), AM 18
μ
V
Maximum effective output power: Front:
50 dB Quieting Sensitivity: MONO 2.0
μ
V (17.3 dBf)
190 W + 190 W (6
Ω
, 1 kHz with 10 % T.H.D.)
STEREO 42
μ
V (34.5 dBf)
Center:
S/N (IHF-A): MONO 72 dB
190 W (6
Ω
, 1 kHz with 10 % T.H.D.)
STEREO 67 dB
Surround:
Total harmonic Distortion (at 1 kHz): MONO 0.3 %
190 W + 190 W (6
Ω
, 1 kHz with 10 % T.H.D.)
STEREO 0.7 %
Surround back / Front height:
GENERAL
190 W + 190 W (6
Ω
, 1 kHz with 10 % T.H.D.)
Power supply: AC 230 V, 50 Hz
Output connectors: 6 – 8
Ω
(SPEAKER A + B : 8
Ω
)
Power consumption: 650 W
• Analog
0.2 W (Standby)
Input sensitivity/Input impedance: 175 mV/50 k
Ω
3.0 W (CEC standby)
Frequency response: 10 Hz – 100 kHz — ±3 dB (Source
Direct mode)
Maximum external dimensions: 440 (W) x 161 (H) x 389 (D) mm
S/N: 98 dB (IHF–A weighted, Source Direct mode)
Weight: 11.8 kg
VIDEO SECTION
REMOTE CONTROL UNIT (RC011SR)
• Standard video connectors
Batteries: R03/AAA Type (two batteries)
Input/output level and impedance: 1 Vp-p, 75
Ω