Marantz SR7005 SR7005 Spec Sheet - Page 2

Home Theater Receiver

Page 2 highlights

SR7005 Home Theater Receiver AUDIO SECTION • Power Amplifier Rated output: Front: 125 W + 125 W (8 O, 20 Hz - 20 kHz with 0.08 % T.H.D.) Center: 125 W (8 O, 20 Hz - 20 kHz with 0.08 % T.H.D.) Surround: 125 W + 125 W (8 O, 20 Hz - 20 kHz with 0.08 % T.H.D.) Surround back / Front height / Front wide: 125 W + 125 W (8 O, 20 Hz - 20 kHz with 0.08 % T.H.D.) Maximum effective output power: Front: 195 W + 195 W (6 O, 1 kHz with 10 % T.H.D.) Center: 195 W (6 O, 1 kHz with 10 % T.H.D.) Surround: 195 W + 195 W (6 O, 1 kHz with 10 % T.H.D.) Surround back / Front height / Front wide: 195 W + 195 W (6 O, 1 kHz with 10 % T.H.D.) Output connectors: 6 - 8 O • Analog Input sensitivity/Input impedance: 200 mV/47 kO Frequency response: 10 Hz - 100 kHz - +1, -3 dB (DIRECT mode) S/N: 96 dB (IHF-A weighted, DIRECT mode) Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.008 % (1 kHz, at 0 dB) S/N ratio - 102 dB Dynamic range - 100 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output: 150 mV Distortion factor: 0.03 % (1 kHz, 3 V) VIDEO SECTION • Standard video connectors Input/output level and impedance: 1 Vp-p, 75 O Frequency response: 5 Hz - 10 MHz - +1, -3 dB • Color component video connector Input/output level and impedance: Y (brightness) signal - 1 Vp-p, 75 O PB / CB signal - 0.7 Vp-p, 75 O PR / CR signal - 0.7 Vp-p, 75 O Frequency response: 5 Hz - 60 MHz - +0, -3 dB (when "Video Convert" set to "OFF") TUNER SECTION [FM] [AM] Note: µV at 75 O, 0 dBf = 1 x 10-15 W Receiving Range: FM 87.5 MHz - 107.9 MHz, AM 530 kHz - 1710 kHz Usable Sensitivity: FM 1.5 µV (14.8 dBf), AM 18 µV S/N (IHF-A): MONO 78 dB STEREO 68 dB HD 85 dB 85 dB Total harmonic Distortion (at 1 kHz): MONO 0.1 % STEREO 0.1 % HD 0.02 % 0.02 % GENERAL Power supply: AC 120 V, 60 Hz Power consumption: 700 W 0.2 W (Standby) 4.0 W (CEC standby) Maximum external dimensions: 440 (W) x 187 (H) x 406 (D) mm Weight: 13.0 kg REMOTE CONTROL UNIT(RC011SR) Batteries: R03/AAA Type (two batteries) For purposes of improvement, specifications and design are subject to change without notice. All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. ©2010 Marantz America, LLC · www.marantz.com

  • 1
  • 2

SR7005
Home Theater Receiver
©2010 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
AUDIO SECTION
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
• Power Amplifier Rated output:
S/N: 74 dB (A weighting, with 5 mV input)
Front:
Rated output: 150 mV
125 W + 125 W (8 O, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Distortion factor: 0.03 % (1 kHz, 3 V)
Center:
125 W (8 O, 20 Hz – 20 kHz with 0.08 % T.H.D.)
VIDEO SECTION
Surround:
• Standard video connectors
125 W + 125 W (8 O, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Input/output level and impedance: 1 Vp-p, 75 O
Surround back / Front height / Front wide:
Frequency response: 5 Hz – 10 MHz — +1, –3 dB
125 W + 125 W (8 O, 20 Hz – 20 kHz with 0.08 % T.H.D.)
• Color component video connector
Maximum effective output power: Front:
Input/output level and impedance: Y (brightness) signal — 1 Vp-p, 75 O
195 W + 195 W (6 O, 1 kHz with 10 % T.H.D.)
PB / CB signal — 0.7 Vp-p, 75 O
Center:
PR / CR signal — 0.7 Vp-p, 75 O
195 W (6 O, 1 kHz with 10 % T.H.D.)
Frequency response: 5 Hz – 60 MHz — +0, –3 dB (when “Video Convert” set
to “OFF”)
Surround:
TUNER SECTION [FM] [AM]
195 W + 195 W (6 O, 1 kHz with 10 % T.H.D.)
Note: μV at 75 O, 0 dBf = 1 x 10–15 W
Surround back / Front height / Front wide:
Receiving Range:
FM
87.5 MHz – 107.9 MHz,
AM
530 kHz – 1710 kHz
195 W + 195 W (6 O, 1 kHz with 10 % T.H.D.)
Usable Sensitivity:
FM
1.5 μV (14.8 dBf),
AM
18 μV
Output connectors: 6 – 8 O
S/N (IHF-A): MONO 78 dB
• Analog
STEREO 68 dB
Input sensitivity/Input impedance: 200 mV/47 kO
HD 85 dB 85 dB
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
Total harmonic Distortion (at 1 kHz): MONO 0.1 %
S/N: 96 dB (IHF–A weighted, DIRECT mode)
STEREO 0.1 %
Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)
HD 0.02 % 0.02 %
Rated output: 1.2 V
GENERAL
• Digital
Power supply: AC 120 V, 60 Hz
D/A output: Rated output — 2 V (at 0 dB playback)
Power consumption: 700 W
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
0.2 W (Standby)
S/N ratio — 102 dB
4.0 W (CEC standby)
Dynamic range — 100 dB
Maximum external dimensions: 440 (W) x 187 (H) x 406 (D) mm
Digital input: Format — Digital audio interface
Weight: 13.0 kg
• Phono equalizer (PHONO input — REC OUT)
REMOTE CONTROL UNIT(RC011SR)
Input sensitivity: 2.5 mV
Batteries: R03/AAA Type (two batteries)
For purposes of improvement, specifications and design are subject to change without notice.