Marantz SR7010 SR7010 Owner s Manual in English - Page 252

Contents 7.1ch + Front B: Connections Playback 0 Setting to assign the power amplifiers within this unit for connecting the second set of front speakers. 0 You can switch between the desired combination of front speakers A and front speakers B. Switch the front speaker using the "Front Speaker" setting. (v p. 267) Settings Tips Appendix o Speakers for ZONE2 / Speakers for ZONE3 / Speakers for ZONE2/ZONE3 / Speakers for BiAmp/ Speakers for 2ch/ Speakers for Front B When "Assign Mode" is set to "7.1ch + ZONE2", "7.1ch + ZONE3", "7.1ch + ZONE2/3-MONO", "7.1ch (Bi-Amp)", "9.1ch/2ch Front" or "7.1ch + Front B" in the menu, select the speaker terminal from which to output the channels to which the internal amplifier is assigned. (v p. 249) FRONT WIDE/HEIGHT2 (Default)： HEIGHT1： SURROUND BACK： The assigned channels are output from the FRONT WIDE/HEIGHT2 speaker terminals. The front wide channel cannot be used. Up to one set of height, ceiling, and Dolby Atmos Enabled channels can be used. The assigned channels are output from the HEIGHT1 speaker terminals. The height, ceiling, and Dolby Atmos Enabled channels cannot be used. The assigned channels are output from the SURROUND BACK speaker terminals. The surround back channel cannot be used. Up to one set of height, ceiling, and Dolby Atmos Enabled channels can be used. Front panel Display Rear panel 252 Remote Index