Marantz SR8002 User Manual - English - Page 59
Acoustic Eq - 4k
View all Marantz SR8002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
ENGLISH 6 ACOUSTIC EQ This display is for setting up the equalizer and changing the Equalizer mode. • PRESET G. EQ ADJ : "6-1 PRESET G. EQ ADJ" (see page 57) • CHECK AUTO 1 & 2 : "6-2 CHECK AUTO" (see page 57) EQ MODE: There are 4 equalizer modes to choose from: PRESET G. EQ that allows the user to manually adjust the equalizer, and AUDYSSEY, FRONT and FLAT that automatically adjust the equalizer from the measurement results of the AUTO SETUP feature (see page 46). AUDYSSEY: This mode adjusts the frequency characteristics of all speakers so as to create the best listening environment for the sound characteristics of the listening room. FRONT: This mode matches the characteristics of each speaker to those of the front speakers. FLAT: This mode flattens the frequency characteristics of all speakers. It is suited for playback of multichannel music such as Dolby Digital and DTS. PRESET: This mode adjusts the graphic equalizer that was set in PRESET G.EQ ADJ to adjust the characteristics of each speaker (see page 57). OFF: The graphic equalizer is not used. 1. Select "6. ACOUSTIC EQ" from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. 6.ACOUSTIC EQ. EQ.MODE : OFF PRESET G.EQ ADJ CHECK AUTO 3. Select "FRONT", "FLAT", "AUDYSSEY", "PRESET" or "OFF" with the 1 or 2 cursor buttons. After you complete this portion of the setup, move the cursor to "RETURN" with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button. To use the remote controller (RC8001SR) to change the EQ MODE, press the AMP button and then the > button until the second page is displayed. When EQ is displayed on the remote controller, press the EQ (D5) button. USE PAGE 2 M D1 D2 D3 D4 D5 CH VOL TUNER CD CD-R MD TAPE 1 AUX1 AUX2 LIGHT RC8001SR Learning Remote Controller AMP 2 Each time this button is pressed, the EQ MODE changes as follows. OFF FRONT FLAT AUDYSSEY PRESET Notes: • "FRONT", "FLAT" and "AUDYSSEY" can be selected after executing the AUTO SETUP feature. • If a speaker that was determined "NON" in Auto Setup is manually turned on, the "AUDYSSEY", "FRONT" and "FLAT" modes cannot be selected. • The equalizer turns off when the Pure Direct mode, Source Direct mode, Dolby Headphone or Virtual mode is set. • ACOUSTIC EQ MODEs are not used during playback of Dolby TrueHD, Dolby Digital Plus, or DTS-HD signals. • Tone Control is disabled when an EQ MODE is in use. 6.ACOUSTIC EQ. EQ.MODE : OFF PRESET G.EQ1 ADJ CHECK AUTO RETURN PRESET ADJUST RESET:ALLCH 63-15.0 CH :SR 125 -2.5 +9 250 -5.0 0dB 500 +9.0 1k +3.5 2k -5.5 -20 4k -7.0 63 250 1k 4k 16k 125 500 2k 8k 8k-18.5 16k-20.0 RETURN EXIT NEXT EXIT CHECK MD:AUDYSSEY CH:SR +9 0dB -20 63 250 1k 4k 16k 125 500 2k 8k AUTO 63-15.0 125 -2.0 250 -5.0 500 +9.0 1k +3.0 2k -5.0 4k -7.0 8k-18.0 16k-20.0 RETURN EXIT RETURN NEXT EXIT 2. Select "EQ. MODE" with the 3 or 4 cursor buttons. 56