Marantz TT-15S1 TT-15S1 User Manual - Page 18
Dothers - parts
View all Marantz TT-15S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
OTHERS The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment. 7 Cleaning external surfaces of equipment The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment gets dirty, wipe the external surfaces with a soft, lint-free cloth. If the equipment becomes heavily soiled: • dilute some neutral detergents suitable for acrylic material. • dip a soft, lint-free cloth in the solution and wring the cloth till it is damp. • wipe the equipment with the damp cloth. • dry the equipment by wiping it with a dry cloth. 7 Repairs In the unlikely event your TT-15S1 should need adjustment or repairs, contact a Marantz Authorized Service Center. Their factory trained technicians have the knowledge, facilities, and access to replacement parts needed for repair and calibration of your turntable. After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation. In the event of difficulty, refer to your Marantz Authorized Dealer or Marantz Authorized Service Center. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment's behaviour. You can find your Marantz Authorized Dealer or Service Center on our website "www.marantz.com". • Approximately every two years you can lubricate (only if you will recognize speed variations) the bearing of the center shaft with the delivered oil. In this case it is enough to put 4 or 5 drops into the center shaft hole in the turntable chassis. Be careful not to add too much oil. 14