Maytag CWG3100AAE Dimension Guide - Page 2

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600 Page 2 This Data Sheet Includes Information On Maytag • Product Model Number (s): • 24" Single Gas Wall Oven with Broiler: CWG3100AAB and CWG3100AAE Additional Information: • Cutout in cabinet should be level and straight. There are no provisions to level the unit after it is installed. • Construct 5/8" minimum plywood floor flush with bottom of opening. Floor must be level and straight and capable of supporting 250 lbs. • For European style cabinets (flush front) the required clearance for operation of the oven door is a minimum spacing of 7/8" between the cutout and the door, hinge or drawer of the cabinet. • Gas requirements: Supply line should be 3/4" . Unit is shipped from factory for use on natural gas. Unit is equipped with built-in conversion for use on LP gas. - Supplied with 1/2" NPT female inlet on regulator. Regulator supplied with unit and a shutoff valve must be installed in an accessible location. - Gas pressure requirements: Natural gas- 5" WC min, 14" WC max. LP gas- 11" WC min, 14" WC max. - Air for combustion enters at the extreme bottom front panel. Do NOT obstruct this opening. • CWG3100AAB : Black. • CWG3100AAE : Monochromatic White. 1 1/2" minimum wide rail Cabinet door There must be 1" minimum between bottom of cabinet door and top of oven console. Oven Control Console Side View (not to scale) Oven opening floor 1" minimum from oven opening floor to top of cabinet door or drawer front. Cabinet door or drawer front Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00. Copyright © Dimension Express, 2002. 149 • NEVER reuse Data Sheets. Data Sheets are subject to change without notice. Dimension Express is a FREE service bureau and is updated daily, it makes far more sense to spend the time necessary to request new Data Sheets for each project, as opposed to the problems, time, costs, and risks associated with reusing old Data Sheets. • Call Dimension Express if you have any questions at (775) 833-3633 • • Always refer to a current Code at a Glance or manufacturer directory • • Data Sheet codes change on the first of odd numbered months at 12:01am • BN352 • A169B149 • • 032603 • 95653 • 59368