Maytag CWG3100AAE Use & Care Guide - Page 4

KEYPAD COOK TIME DELAY START CANCEL TEMP/TIME FEATURE Timed Cooking Delayed Start Cooking start Oven function Temperature and time adjust INSTRUCTIONS Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of time, and/or shut off automatically. To set a Timed Cook see "Timed Cooking" section. The DELAY keypad is used to enter the starting time for an oven function with a delayed start. Delay start should not be used for foods such as breads and cakes because they may not bake properly. To set a Delay Timed Cook see "Timed Cooking" section. The Start keypad begins any oven function. If Start is not pressed within 1 minute after pressing a keypad, that function is canceled and the time of day is displayed. The Cancel keypad stops any function except the Clock, Kitchen Timer, and Oven Control Lockout. The "+" or "-" arrow pads are used to adjust time and temperature settings. OVEN USE Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled. This oven is equipped with a pilotless ignition. The oven will not operate during a power failure or if disconnected from the wall outlet. Do not attempt to operate the oven without power. IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and wellventilated room. Electronic Oven Controls Control Display The display will flash when powered up or after a power loss. Press CANCEL to clear. When oven is not in use, the time of day is displayed. Indicator lights show functions that are in use. Tones Tones are audible signals, indicating the following: Basic Functions One tone ■ Valid pad press ■ Oven is preheated (long tone) ■ Function has been entered ■ Reminder (on some models), repeating each minute after the end-of-cycle tones Three tones ■ Invalid pad press Four tones ■ End of cycle Reminder Tones: The audible tones at the end of the Kitchen Timer may be set to beep once ("b1") or continue to beep ("b"). Press and hold KITCHEN TIMER for 5 seconds to enter Options mode. "Opt" will appear on the display. Use TEMP/TIME to cycle through the options until "b" or "b1" is shown in the display. Choose on or off using the KITCHEN TIMER keypad. Press CANCEL to exit the mode. Fahrenheit and Celsius The temperature is preset at Fahrenheit, but can be changed to Celsius. To change: Press and hold BROIL for 5 seconds. A tone will sound, and "°C" or "°F" will appear on the display. Repeat to change back. To exit mode, press CANCEL. Oven Control Lockout Only the Clock and Kitchen Timer keypads will function with the controls locked. To lock controls: Press and hold START for 3 seconds. The display will show "Loc." To unlock controls: Press and hold START for 3 seconds. The display will show "Time of Day." 12-Hour Shutoff The oven control is set to automatically shut off the oven 12 hours after the oven turns on. This will not interfere with any timed or delayed cook function. Oven Temperature Control IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door may cause element cycling to give incorrect readings. The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius. To Adjust Oven Temperature Calibration: 1. Press and hold BAKE for 5 seconds until the oven display shows the current calibration, for example "0°F CAL" or "00." 2. Press the TEMP/TIME "+" or "-" arrow pads to increase or to decrease the temperature in 10°F (5°C) amounts. The adjustment can be set between 30°F (17°C) and -30°F (-17°C). 3. Press START. 4