Maytag MBF2254HEW Use and Care Guide - Page 24

Rep acinfl, Bulbs

Page 24 highlights

Rep acinfl Light Bulbs Fresh Food Section {style of light shield varies) Slide clear light shield toward back of compartment to release from light assembly. 2. Remove light bulbs. 3. Replace with appliance bulbs no greater than 40 watts. 4_ Replace light bulb cover by inserting tabs on light shield into liner holes on each side of light assembly. Slide shield toward front of refrigerator until it locks into phce. Do not force shield beyond locking point. Doing so may damage light shield. Freezer {style of light shield varies} 1. Reach behind the light cover. 2. With firm pressure, press forward on the notches at the back of the cover and pull down. The cover will open from the back. 3. Remove the cover. 4_ Remove light bulb. 5. Replace bulb with appliance bulb no greater than 4@ _vatts, Insert front tabs of light cover into slots in freezer liner and snap rear portion over light assembly until rear tab engages. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Rep acinfl
Light
Bulbs
Fresh
Food Section
{style
of
light
shield
varies)
Slide clear
light
shield
toward
back
of
compartment
to release
from
light
assembly.
2. Remove
light
bulbs.
3. Replace
with
appliance
bulbs no greater
than
40
watts.
4_
Replace
light
bulb cover
by inserting
tabs on light
shield
into liner
holes on each side of light
assembly. Slide shield
toward
front
of refrigerator
until
it locks
into phce.
Do not force
shield
beyond
locking
point.
Doing so may damage
light shield.
Freezer
{style
of
light
shield
varies}
1. Reach behind
the light
cover.
2. With firm
pressure,
press
forward
on the notches
at
the back
of the cover and
pull down.
The cover will
open from
the back.
3. Remove
the cover.
4_
5.
Remove
light
bulb.
Replace
bulb with
appliance
bulb no
greater
than
4@ _vatts,
Insert front
tabs
of light
cover
into slots
in freezer
liner and snap rear
portion
over light
assembly
until
rear tab
engages.
23