Maytag MDB4709AWS Installation Instructions - Page 11
Make Power Supply Cord Connection - rating
UPC - 883049154275
View all Maytag MDB4709AWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
What type of electrical connection will you use? Power Supply Cord: Follow Option A instructions Direct Wire: Follow Option B instructions If using Option B, proceed to "Determine Cabinet Opening," to continue with the installation of your dishwasher. Make Power Supply Cord Connection Option A, Power Supply Cord: 1 Power Cord-Route cord into terminal box Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 2 Power Supply Cord- Connect ground wire Route cord so that it does not touch dishwasher motor to lower part of dishwasher tub. Pull cord through strain relief in terminal bow. Select UL Listed/CSA Approved twist-on wire connectors rated to connect your power supply cord to 16-gauge dishwasher wiring. Ground wire Ground wire Washer Ground connector Remove the green grounding screw and place through the ring terminal of the green ground wire. Reattach and tighten the green screw. 3 Power Cord-Connect remaining wires NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured. Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors. 11