Maytag MDB4709AWW Installation Guide - Page 15
Important, Notes
UPC - 883049154879
View all Maytag MDB4709AWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Check that water line is on the left side of opening and drain hose is near the center of the cabinet opening. If the door falls open, increase the spring tension by moving the spring end toward the back of the dishwasher. NOTE: Springs should be in the same notches on left and right sides. With another person holding the dishwasher to keep it from tipping, open and close the door a few times. If the door closes or falls open under its own weight, the door tension will need to be adjusted. IMPORTANT: If wheels were removed, cover the floor when moving the dishwasher to avoid damage to the floor. Slowly move dishwasher completely into cabinet opening. Do not kink or pinch water line, drain hose, power supply cord or direct wire between dishwasher and cabinet. Remove cardboard from under dishwasher. NOTES: ■ It is all right if dishwasher fits tightly into cabinet opening. Do not remove insulation blanket - the blanket reduces the sound level. ■ If using power cord, make sure to route end through hole in cutout before sliding dishwasher into cabinet opening. If the door closes too quickly, decrease the spring tension by moving the spring end toward the front of the dishwasher. NOTE: Springs should be in the same notches on left and right sides. Align front of dishwasher door panel with front of cabinet doors. You may need to adjust alignment to be even with your cabinets. 15