Maytag MDB5601AWQ User Instructions - Page 6
Important, Option Selections, Options, Dish Load Types, Descriptions, Use With, Control Lock, - dishwasher
UPC - 719881164861
View all Maytag MDB5601AWQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
OPTION SELECTIONS OPTIONS DISH LOAD TYPES For best drying results, dry dishes with heat. To sanitize your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Loads containing tough, baked-on food. Use for loads with tough food soil. DESCRIPTIONS Turn OFF when loads contain plastic dinnerware that may be sensitive to high temperatures. This option with the use of rinse aid will provide the best drying performance. Raises the water temperature in the final rinse to approximately 154°F (68°C). This high temperature rinse sanitizes your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. The Sanitize option adds heat and time to the cycle. Increases the target water temperature during the wash portions of the cycle. Adds heat, wash time and water to the cycle. Depending on which cycle is being used, adds heat and/or wash time to the cycle. USE WITH: Heavy Wash, Normal Wash, China/Crystal, Insta Wash or Sensor Clean cycles Heavy Wash, Normal Wash, Light Wash, China/Crystal or Sensor Clean cycles All cycles, except Rinse Only and Insta Wash Heavy Wash or Normal Wash Use for loads with normal Raises temperature in the final rinse to 160°F (71°C). amounts of food soil. All cycles, except Quick Wash and Rinse Only Use for loads with normal amounts of food soils; specialized option for stemware and glass cleaning. To run your dishwasher at a later time or during offpeak hours. Provides deep clean and shine by adding steam to the cycle. Raises the water temperature in the final rinse to approximately 154°F (68°C). All cycles, except Rinse Only and Insta Wash Delays the start of a cycle up to 9 hours. Select a wash cycle and options. Press Delay. Press Start/ Cancel. Close the door firmly. All cycles, except Rinse Only Control Lock To avoid unintended use of your dishwasher, or cycle and option changes during a cycle. To turn on Lock, press and hold Heated Dry for at least 3 seconds. To turn off Lock, press and hold Heated Dry for at least 3 seconds. When Control Lock is lit, all buttons are disabled. If you press any pad while your dishwasher is locked, the light flashes 5 times. The dishwasher door can be opened while the controls are locked. Anytime IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed. CONTROLS AND CYCLE STATUS CONTROL PURPOSE To start or resume a wash cycle COMMENTS If the door is opened during a cycle or the power is interrupted, all lights will flash to indicate suspended cycle. The cycle will not resume until the door is closed. To follow the progress and status of your dishwasher cycle Clean indicator glows when a cycle is finished. If you select the Sanitize option, when the Sanitize cycle is finished, the Sanitized indicator glows. If your dishwasher did not properly sanitize your dishes, the light will not come on. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature. The clean and sanitize lights go off when the door has been opened for more than 30 seconds or the CANCEL key is pressed. 6