Maytag MDB6701AWS User Instructions - Page 6

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH: For best drying results, dishes with heat. When loads Contain piastic dinnerware that may be sensitive t0 high temperatures, This option With the use of rinse aid Will provide the best drying performancel HeavY Wash, Normal Wash, China/Crystal, Lnsta Wash or Senso [ ulean cyc!es To sanitize your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Raises the water temperature in the final rinse to approximately 154°F (68°C). This high temperature rinse sanitizes your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. The Sanitize option adds heat and time to the cycle. Heavy Wash, Normal Wash, Light Wash, China/Crystal or Sensor Clean cycles Loads containing tough, baked-on food Increases the target water temperature during the wash portions of the cycle. Adds heat, wash time and water to the cycle, All cycles, except Rinse Only and Insta Wash Use for loads with tough food soil. Depending on which cycle is being used, adds heat and/or wash time to the cycle. Heavy Wash or Normal Wash USe for loads With normal amounts of food soil. Raises temperature inthe final rinse to i60°F (71°O)i All Cycles, except QUick Wash and Rinse Only Use for loads with normal amounts of food soils; specialized option for stemware and glass cleaning. To run y0Ui dishwasher at a lat,e.r timi e or dun" ng off peak nours Provides deep clean and shine by adding steam to the cycle. Raises the water temperature in the final rinse to approximately 154°F (68°C). De!ays the start 0f a cYcle up to 9 hoUrsl se!ect a WaSh cYcle and optionsl Press UelaYl PressStartJ Cancel. C!ose the door firmly. All cycles, except Rinse Only and Insta Wash All cycles, except RinSe Only Control Lock To avoid unintended use of your dishwasher, or cycle and option changes during a cycle. To turn on Lock, press and hold Heated Dry for at least 3 seconds. To turn off Lock, press and hold Heated Dry for at least 3 seconds. When Control Lock is lit, all buttons are disabled. If you press any pad while your dishwasher is locked, the light flashes 5 times. The dishwasher door can be opened while the controls are locked. Anytime IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed. CONTROL PURPOSE To start 0r iesume a COMMENTS if the do0r is opened during a CYcle oi the p0wer is interrupted, all lights Will flash to indicate To follow the progress and status of your dishwasher cycle Clean indicator glows when a cycle is finished. If you select the Sanitize option, when the Sanitize cycle is finished, the Sanitized indicator glows. If your dishwasher did not properly sanitize your dishes, the light will not come on. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature. The clean and sanitize lights go off when the door has been opened for more than 30 seconds or the CANCEL key is pressed.