Maytag MEC4536WC Installation Instructions - Page 6
Complete Installation
UPC - 883049185095
View all Maytag MEC4536WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4-Wire Cable from Home Power Supply IMPORTANT: Use the 4-wire cable from home power supply where local codes do not permit connecting the frame-ground conductor to the neutral (white) junction box wire: A B E F G 3-Wire Cable from Home Power Supply IMPORTANT: Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire. A E B F G C H D I A. Cable from home power supply B. Red wires C. Green or bare ground wires D. 3-wire cable from cooktop E. Junction box F. White wire (from home power supply) G. UL listed wire connector H. Black wires I. UL listed or CSA approved conduit connector 1. Connect the 2 black wires together using the UL listed wire connectors. 2. Connect the 2 red wires together using the UL listed wire connectors. 3. Connect the green (or bare) ground wire from the cooktop cable to the green (or bare) ground wire (in the junction box) using the UL listed wire connectors. 4. Put a UL listed wire connector on the end of the white wire. NOTE: Do not connect the bare ground wire to the neutral (white) wire in the junction box. 5. Install junction box cover. H C I D A. Cable from home power supply B. Red wires C. Green (or bare) ground wire from cooktop D. 3-wire cable from cooktop E. Junction box F. White wire (from home power supply) G. UL listed wire connector H. Black wires I. UL listed or CSA approved conduit connector 1. Connect the 2 black wires together using the UL listed wire connectors. 2. Connect the 2 red wires together using the UL listed wire connectors. 3. Connect the green or bare cooktop cable wires to the white (neutral) wire in the junction box using the UL listed wire connectors. 4. Install junction box cover. Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all your tools. 3. Dispose of/recycle all packaging materials. 4. Use a mild solution of liquid household cleaner and warm water to clean cooktop before use. Dry thoroughly with a soft cloth. For more information, see the "Cooktop Care" section of the Use and Care Guide. 5. Read "Cooktop Use" in the cooktop Use and Care Guide. 6. Reconnect power. NOTE: If the cooktop does not work after turning on the power, check that a circuit breaker has not tripped or a household fuse has not blown. See "Troubleshooting" section in the Use and Care Guide for further information. If you need Assistance or Service: Please reference the "Assistance or Service" section of the Use and Care Guide or contact the dealer from whom you purchased your cooktop. 6