Maytag MED3500FW Dimension Guide
Maytag MED3500FW Manual
View all Maytag MED3500FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MED3500FW manual content summary:
- Maytag MED3500FW | Dimension Guide - Page 1
All dimensions show recommended and minimum spacing allowed. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing should be considered on all sides of the dryer to - Maytag MED3500FW | Dimension Guide - Page 2
have a fuse in the neutral or grounding circuit. WATER (STEAM MODELS ONLY) REQUIREMENTS The dryer must be : Determine vent length and elbows needed for best drying performance: ■■ Use the following "Vent Dimensions are for planning purposes only. For complete details, see Installation Instructions
ELECTRIC DRYER
PRODUCT MODEL NUMBERS
W10775223A
12/2015
MED3500F, MED5500F, MED8200F
Back view
Side view
Front view
Spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
■
Additional spacing should be considered for ease of installation and servicing.
■
Additional clearances might be required for wall, door, and floor moldings.
■
Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
■
For closet installation with a door, minimum ventilation openings in the top and bottom of
the door are required. Louvered doors with equivalent ventilation openings are acceptable.
■
Companion appliance spacing should also be considered.
Recommended installation clearances
27"
(686 mm)
38
3
/
4
" Min.
(984 mm)
39" Max.
(990 mm)
NOTE:
Most
installations require
a minimum of
5" (127 mm)
clearance behind
dryer for exhaust
vent with elbow.
See “Venting
Requirements.”
*Approx. measurement.
6
1
/
2
"
(165 mm)
29
7
/
8
"*
(759 mm)
3
1
/
2
"*
(89 mm)
6
1
/
8
"*
(156 mm)
14
3
/
8
"
(365 mm)
3
/
4
"*
(18 mm)
Power supply
cord/cable
Water inlet
(Steam models
only)
Vent
18" min.
(457 mm)
1"
(25 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
0"–5"*
(0 mm–127 mm)
*0" (0 mm) spacing is allowed for straight-back venting only.
For steam models only, inlet hose must not be kinked.