Maytag MED4200BW Use & Care Guide - Page 9
Cycle Guide - Timed Cycles, Cycle Guide - Steam Cycle On Some Models
View all Maytag MED4200BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CYCLE GUIDE - TIMED CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Adjusting drying time on Timed Cycles When you select a Timed Cycle, the default time appears in the display. Use + and - to increase or decrease the time in 1-minute increments. Touch and hold to change the time in 5-minute increments. The maximum dry time is 100 minutes. Selecting the Drying Temperature A High heat setting may be used for drying heavyweight items such as towels and work clothes. A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits. Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics. NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions. Items to dry: Cycle: Drying Default Available Temperature: Time: Options: Cycle Details: Any load Timed Dry High (the last Wrinkle Prevent NOTE: Select Air Medium timed dry Only to dry foam, Low time set) rubber, plastic, or Extra Low heat-sensitive Air Only fabrics. Use to dry items to a damp level for items that do not require an entire drying cycle. Select a drying temperature based on the type of fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting. Small loads and Rapid Dry High sportswear Medium Low Extra Low Air Only Small loads and sportswear Air Dry 18 Wrinkle Prevent For small loads of 3-4 items. 18 For small loads of 3-4 items. CYCLE GUIDE - STEAM CYCLE (on some models) Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle. Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics. Items to refresh: Cycle: Drying Default Available Temperature: Time: Options: Shirts, blouses, Refresh High 15 Wrinkle Prevent and slacks Cycle Details: Use to reduce light wrinkles from loads left in the dryer too long. Do not add dryer sheets. Load Size Recommendations For best results, follow the load size recommendations noted for each cycle. Small load: Fill the dryer drum with 3-4 items, not more than 1/4 full. Medium load: Fill the dryer drum up to about 1/2 full. Large load: Fill the dryer drum up to about 3/4 full. Do not overload. Items need to tumble freely. 9