Maytag MED5500FC Dimension Guide

Maytag MED5500FC Manual

Get Maytag MED5500FC PDF manuals and user guides View all Maytag MED5500FC manuals
Add to My Manuals
Save this manual to your list of manuals

Maytag MED5500FC manual content summary:

  • Maytag MED5500FC | Dimension Guide - Page 1
    All dimensions show recommended and minimum spacing allowed. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing should be considered on all sides of the dryer to
  • Maytag MED5500FC | Dimension Guide - Page 2
    fuse in the neutral or grounding circuit. WATER (STEAM MODELS ONLY) REQUIREMENTS The dryer must be connected to the cold water faucet using new inlet hoses (not supplied). without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with
  • 1
  • 2
ELECTRIC DRYER
PRODUCT MODEL NUMBERS
W10775223A
12/2015
MED3500F, MED5500F, MED8200F
Back view
Side view
Front view
Spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
■
Additional spacing should be considered for ease of installation and servicing.
■
Additional clearances might be required for wall, door, and floor moldings.
■
Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
■
For closet installation with a door, minimum ventilation openings in the top and bottom of
the door are required. Louvered doors with equivalent ventilation openings are acceptable.
■
Companion appliance spacing should also be considered.
Recommended installation clearances
27"
(686 mm)
38
3
/
4
" Min.
(984 mm)
39" Max.
(990 mm)
NOTE:
Most
installations require
a minimum of
5" (127 mm)
clearance behind
dryer for exhaust
vent with elbow.
See “Venting
Requirements.”
*Approx. measurement.
6
1
/
2
"
(165 mm)
29
7
/
8
"*
(759 mm)
3
1
/
2
"*
(89 mm)
6
1
/
8
"*
(156 mm)
14
3
/
8
"
(365 mm)
3
/
4
"*
(18 mm)
Power supply
cord/cable
Water inlet
(Steam models
only)
Vent
18" min.
(457 mm)
1"
(25 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
0"–5"*
(0 mm–127 mm)
*0" (0 mm) spacing is allowed for straight-back venting only.
For steam models only, inlet hose must not be kinked.