Maytag MED6500M Cycle Guide - Page 2

Steam Refresh Cycle on some models, Timed Cycles, Items to Dry, Cycle, Temperature, Available, Options

Page 2 highlights

Items to Dry: Cycle: Work clothes, casual wear, mixed cottons, sheets, corduroys. LESS DRY Temperature: High Medium Low Extra Low Available Options: Description: Wrinkle Prevent Mute Cycle Signal Pet Pro Uses Medium heat as default to dry loads of Mixed Fabrics and items, with slightly lower temperatures than Normal Cycle and tuned to achieve "Less Dry" results. Large loads of jeans, towels and heavyweight TOWELS items. High Medium Low Extra Low Wrinkle Prevent Mute Cycle Signal Pet Pro This is a long cycle with High heat as default. This cycle is not recommended for all fabrics. Use for large loads of heavyweight fabrics. The Pet Pro Modifier adds time to the end of cycle to boost hair removal performance. The heating system is turned off during this time to protect clothing from over drying. Steam Refresh Cycle (on some models) Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics. Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle. Items to Refresh: Cycle: Temperature: Available Options: Description: Shirts, blouses and slacks High STEAM REFRESH Medium Wrinkle Prevent Mute Cycle Signal Pet Pro Mute Cycle Signal Pet Pro Use to smooth out wrinkles and reduce odors from loads left in the dryer too long. Do not add dryer sheets. Timed Cycles In these cycles, you can specify the drying time. Time options available are 15, 30, 60 and 90 minutes. If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to the default. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Items to Dry: Cycle: Temperature: Available Options: Description: Any Load. TIMED DRY High Medium Low Extra Low Wrinkle Prevent Mute Cycle Signal Use to dry items to a damp level for items that do not require an entire drying cycle. Select a drying temperature based on the type of fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting. Small loads and sportswear. QUICK DRY High Medium Low Extra Low Wrinkle Prevent Mute Cycle Signal For small loads of 3-4 items. Foam, rubber, plastic or heat sensitive fabrics. AIR ONLY N/A Wrinkle Prevent Uses unheated air to dry heat-sensitive items Mute Cycle Signal 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

2
Items to Dry:
Cycle:
Temperature:
Available
Options:
Description:
Work clothes, casual
wear, mixed cottons,
sheets, corduroys.
LESS DRY
High
Medium
Low
Extra Low
Wrinkle Prevent
Mute Cycle Signal
Pet Pro
Uses Medium heat as default to dry loads of
Mixed Fabrics and items, with slightly lower
temperatures than Normal Cycle and tuned to
achieve "Less Dry" results.
Large loads of jeans,
towels and heavyweight
items.
TOWELS
High
Medium
Low
Extra Low
Wrinkle Prevent
Mute Cycle Signal
Pet Pro
This is a long cycle with High heat as default.
This cycle is not recommended for all fabrics.
Use for large loads of heavyweight fabrics.
The Pet Pro Modifier adds time to the end of cycle to boost hair removal performance. The heating system is turned off during this time to
protect clothing from over drying.
Steam Refresh Cycle (on some models)
Steam cycles
are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Not all cycles and settings are available on all models. Settings and options shown in
bold
are default settings for that cycle.
Items to Refresh:
Cycle:
Temperature:
Available
Options:
Description:
Shirts, blouses and
slacks
STEAM REFRESH
High
Medium
Wrinkle Prevent
Mute Cycle Signal
Pet Pro
Mute Cycle Signal
Pet Pro
Use to smooth out wrinkles and reduce odors
from loads left in the dryer too long. Do not
add dryer sheets.
Timed Cycles
In these cycles, you can specify the drying time. Time options available are 15, 30, 60 and 90 minutes. If settings are changed, the new
settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to the default. Not all features and cycles
are available on all models. Not all settings and options are available on each cycle.
Items to Dry:
Cycle:
Temperature:
Available
Options:
Description:
Any Load.
TIMED DRY
High
Medium
Low
Extra Low
Wrinkle Prevent
Mute Cycle Signal
Use to dry items to a damp level for items that
do not require an entire drying cycle. Select a
drying temperature based on the type of
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Small loads and
sportswear.
QUICK DRY
High
Medium
Low
Extra Low
Wrinkle Prevent
Mute Cycle Signal
For small loads of 3-4 items.
Foam, rubber, plastic or
heat sensitive fabrics.
AIR ONLY
N/A
Wrinkle Prevent
Mute Cycle Signal
Uses unheated air to dry heat-sensitive items