Maytag MED8630HW Owners Manual - Page 10
Using Your Dryer
![]() |
View all Maytag MED8630HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
USING YOUR DRYER WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the Important Safety Instructions before operating this appliance. 1. Clean the lint screen 3. Touch POWER/CANCEL AirDry High : WER Less More Off +Steam Sensing Wet Damp Cool Down Check Vent Touch POWER/CANCEL to turn on the dryer. Clean the lint screen before each load. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove. Push the lint screen firmly back into place. For additional cleaning information, see "Dryer Care." 4. Select the desired cycle 2. Load the dryer EXTRA POWER Appearance may vary. Appearance may vary. Open the door by pulling on the handle. Place laundry in the dryer. Add a dryer sheet to wet load if desired. Close the door. IMPORTANT: Do not tightly pack the dryer. Items need to tumble freely. Tightly packing can lead to poor drying performance and may increase wrinkling and tangling. 10 Select the desired cycle for your load. See the "Cycle Guide" for more information about each cycle. Not all cycles are on all models. Press the Cycle Control Knob to activate the Extra Power option, which provides an additional 10 minutes of cycle time (including additional heat and tumbling, where applicable).
![](/manual_guide/products/maytag-mgd8630hc-owners-manual-4100cc9/10.png)