Maytag MEDC465HW Quick Reference Sheet

Dryer Quick Start Guide

OPERATING INSTRUCTIONS

WARNING

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil

on it (including cooking oils).

Items containing foam, rubber, or plastic must be

dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in

death or fire.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in

death, explosion, or fire.

WARNING:

To reduce the risk of fire, electric shock, or injury to persons,

read the IMPORTANT SAFETY INSTRUCTIONS, located in your

appliance's Owner's Manual, before operating this appliance.

Button Descriptions

1.

TEMPERATURE

Select a drying temperature based on the fabrics in your load. If you are

unsure of the temperature to select for a load, select the lower setting

rather than the higher setting.

Step 1.

Clean Lint Screen

Step 2.

Load Clothes; then Close

Door

Step 3.

Select Cycle and Settings

Step 4.

Press Start

Cycle Guide – Normal Cycle

Sensor Dry/Automatic Dry — Senses moisture in the load or air temperature and shuts off when the load reaches

the selected dryness level.

Items to Dry:

Cycle:

Temperature:

Description:

Jeans, heavy work

clothes, towels

Energy Preferred

Normal

High

Automatic cycles give the best drying in the

shortest time. Drying time varies based on

fabric type, load size, and dryness setting.

Select a drying temperature based on the

fabrics in your load. If you are unsure of the

temperature to select for a load, select the

lower setting rather than the higher setting.

Work clothes,

medium-weight

fabrics, sheets

Medium or Low

Casual, shirts,

pants, lightweight

items, synthetics,

delicates,

athleticwear

Low

NOTE:

Government energy certifications for the Maytag

®

Electric models were based on the Timed Dry cycle with

the Maximum drying temperature setting. The as-shipped defaults of Sensor Dry, Automatic Dry, Low Heat, Wrinkle

Shield

™

were not used.

NOTE:

If loads do not seem as dry as you would like, select Very Dry the next time you dry a similar load. If loads

seem drier than you like, select Less Dry the next time you dry a similar load.

Online Ordering Information

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please

see the Owner’s Manual included with your machine.

For information on any of the following items, the full cycle guide, detailed product dimensions, or for complete

instructions for use and installation, please visit https://www.maytag.com/owners, or in Canada

https://www.maytag.ca/owners. This may save you the cost of a service call.

However, if you need to contact us, use the information listed below for the appropriate region.

United States:

1–800–344–1274

Maytag Brand Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022–2692

Canada:

1–800–688–2002

Maytag Brand Appliances

Customer eXperience Centre

200–6750 Century Ave.

Mississauga, Ontario L5N 0B7

2.

CYCLE CONTROL KNOB

Use the Cycle Control knob to select available cycles on your dryer. Turn the

knob to select a cycle for your laundry load. See the online “Cycle Guide” for

details.

TIMED DRY

Will run the dryer for the specified time on the control. On models with a

selectable temperature knob, you may choose a setting based on the fabrics in

your load. Drying time and temperature will depend on your dryer model.

SENSOR DRY/AUTOMATIC DRY

Senses moisture in the load or air temperature and shuts off when the load

reaches the selected dryness level. Gives the best drying in the shortest time.

Drying time will vary based on fabric type, load size, dryness setting, and

temperature setting.

WRINKLE CONTROL Feature (on some models)

The Wrinkle Control feature will run after your drying cycle is complete. It

periodically starts and stops the dryer, tumbling the load without heat to help

avoid wrinkling.

Not all features, cycles, and options are available on all models. Appearance may vary.

Wrinkle Control automatically starts at the end of the cycle. Opening the door

will stop this feature.

NOTE:

A signal will sound periodically when the Wrinkle Control setting is

selected, but only if the End of Cycle Signal is also selected.

3.

WRINKLE CONTROL Feature (on some models)

When you are unable to remove a load of clothes from the dryer as soon as it

stops, wrinkles can form. The Wrinkle Control option periodically tumbles,

rearranges, and fluffs the load to help keep wrinkles from forming.



Get up to 90 minutes of heat-free, periodic tumbling at the end of a cycle.

Turn the Wrinkle Control knob to Off or 90 min. at any time before the cycle

has ended.

4.

PUSH TO START/END OF CYCLE SIGNAL

The End of Cycle Signal produces an audible sound when the drying cycle is

finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

Turn the End of Cycle Signal knob to select the desired setting (On or Off).

Press the Push to Start knob to start the dryer.

W11355745A

W11355961A-SP

Section	Page
Dryer Quick Start Guide	1
Operating Instructions_W11355745	1
Guide de démarrage rapide de la sécheuse	2

Maytag MEDC465HW Quick Reference Sheet

Maytag MEDC465HW Manual

Maytag MEDC465HW manual content summary: