Maytag MEDX600XW Installation Instructions - Page 17
Reverse Door Swing Optional - parts
UPC - 883049199092
View all Maytag MEDX600XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Reverse Door Swing (Optional) 1. Place towel on dryer 4. Remove screws from hinges Place towel on top of dryer to avoid damaging the surface. 2. Remove bottom screws Remove screws attaching hinges to door. 5. Remove screws from door Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges. 3. Lift door off top screws Remove screws at top, bottom, and side of door (5 screws). Keep door screws separate from hinge screws as they are different sizes. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door. NOTE: Do not pry apart with putty knife or screwdriver. Do not pull on door seal or plastic door catches. 6. Rotate outer door Lift door until top screws in dryer cabinet are in large part of hinge slot. Pull door forward off screws. Set door (handle side up) on top of dryer. Remove top screws from dryer cabinet. Take outer door and rotate it 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert 5 door screws. 17