Maytag MER5765RAS Use and Care Guide - Page 14

To cancel

the

Clock

display:

If you do not want the time of day to display:

Press and hold the

CANCEL

and

Clock

pads for

three

seconds. The time of day will

disappear from the display

When the clock display is canceled, press

the

Clock

pad to briefly display the time of

day.

CANCEL

To restore

the

Clock

display:

Press and hold the

CANCEL

and Clock

pads for

three

seconds. The time of day will reappear

in

the display.

Timer

The timer can be set from one minute (0:01) up to 99 hours

and 59 minutes (99:59).

The timer can be used independently of any other oven

activity. It can also be set while another oven function is

operating.

The timer does not control the oven. It only controls a beeper.

To set the Timer:

1. Press the

Timer

pad.

Timer

,0:00

lights

in

the display.

, The colon flashes

in

the display.

2. Press the More+

or

Less=

pad until the

correct time appears

in

the display.

, The colon will continue to flash.

.

Less-

Press

Timer

pad again or wait

four

seconds.

, The colon continues flashing and the time begins

counting down.

, The last minute of the timer countdown will be displayed

as seconds.

4. At the end of the set time, one long beepwill

sound.

To

cancel

the

Timer:

1. Press and hold the

Timer

pad for

three

seconds.

OR

2.

Press the

Timer

pad and set the time

to 0:00.

Locking

the

Control

and Oven

Door

The touchpad controls and oven door can be

locked

for

safety, cleaning, or to prevent unwanted use. They will not

function when locked.

If the oven is currently in use, the controls and door cannot be

locked.

The

current time of day will remain

in

the display when the

controls are locked.

To lock:

Press and hold the

CANCEL

and

Cook &

Hold

pads for

three

seconds. (Press

CANCEL

pad first.)

,

LOCK flashes

in

the display.

To unlock:

Press and hold the

CANCEL

and

Cook & Hold

pads for

three

seconds. (Press

CANCEL

pad first.)

,

LOCK disappears from the display.

Fault Codes

BAKE or LOCK may flash rapidly in the display to alert you if

there

is

an error or a problem.

If BAKE or LOCK flash

in

the

display, press

CANCEL

pad. If BAKE or LOCK continue to

flash, disconnect power to the appliance.

Wait a few minutes,

and then reconnect power. If the flashing still continues,

disconnect power to the appliance and call an authorized

servicer.

Baking

To set

Bake:

1. Press the Bake pad.

,

BAKE will flash.

2.

.

, 000 will light in the display.

Select the oven temperature.

The oven

temperature can be set from 170° to 550°. Press

.............................

or press and hold the

More+

or

Less=

pads.

'

Less-

, 350 ° will light when either pad is first pressed

.

..............................

,

Press the More+

pad to increase the temperature.

,

Pressthe

Less-

pad to decrease the temperature.

Press Bake pad again or wait

four

seconds.

,

BAKEwill stop flashing and light in the display.

4.

,

100° or the actual oven temperature will display. The

temperature will rise in 5°

increments

until the preset

temperature is reached.

Allow the oven to preheat for 8-15 minutes.

, When the set oven temperature is reached, one long

beep will sound.

,

To

recall the set temperature during preheat, press the

Bake pad.

Place food in the oven.

5.

6. Check cooking progress. Cook longer

if

needed.

7. When cooking is finished, press

CANCEL.

(_CAXI('FI_

8.

Remove food from the oven.

13

Maytag MER5765RAS Use and Care Guide - Page 14

Fault Codes

Page 14 highlights