Maytag MER5775RAS Use and Care Guide - Page 14

Timer The timer can be set from one minute (0:01) up to 99 hours and 59 minutes (99:59). and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer. The timer can be used independently of any other oven activity. It can also be set while another oven function is operating. The timer does not control the oven. It only controls a beeper. To set the Timer: 1. Press the Timer pad. Baking To set Bake: 1. Press the Bake pad. • BAKE will flash. • 000 will light in the display. • 0:00 lights in the display. • The colon will flash. 2. Press the More+ or Less- pad until the correct time appears in the display. • The colon will continue to flash. 3. Press Timer pad again or wait four seconds. • The colon continues flashing and the time begins counting down. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pad. • 350° will light when either pad is first pressed. • Press the More+ pad to increase the temperature. • Press the Less- pad to decrease the temperature. 3. Press Bake pad again or wait four seconds. • BAKE will stop flashing and light in the display. • The last minute of the timer countdown will be displayed as seconds. 4. At the end of the set time, one long beep will sound. To cancel the Timer: 1. Press and hold the Timer pad for three seconds. OR • 100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached. 2. Press the Timer pad and set the time to 0:00. 4. Allow the oven to preheat for 8-15 minutes. Locking the Control and Oven Door The touchpad controls and oven door can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked. If the oven is currently in use, the controls and door cannot be locked. The current time of day will remain in the display when the controls are locked. • When the set oven temperature is reached, one long beep will sound. • To recall the set temperature during preheat, press the Bake pad. 5. Place food in the oven. 6. Check cooking progress at minumum cooking time. Cook longer if needed. 7. When cooking is finished, press CANCEL pad. 8. Remove food from the oven. To lock: Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.) Notes: • To change the oven temperature during cooking, press the Bake pad and then the More+ or Less- pad until you • LOCK flashes in the display. To unlock: Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.) • LOCK disappears from the display. reach the desired temperature. • To change the oven temperature during preheat, press the Bake pad twice and then the More+ or Less- pad until you reach the desired temperature. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 16. Fault Codes BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press CANCEL pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, Baking Differences Between Your Old and New Oven It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 16. 13