Maytag MER8770WW Installation Instructions - Page 5
Warning
UPC - 883049185248
View all Maytag MER8770WW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Install Anti-Tip Bracket WARNING Floor Mounting A B Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. 1. Remove the anti-tip bracket that is taped in the storage drawer. 2. Determine which mounting method to use: floor or wall. If you have a stone or masonry floor you can use the wall mounting method. 3. Determine and mark the edge of the range in the cutout space. The mounting bracket can be installed on either the left side or right side of the cutout. Position mounting bracket in cutout so that right (or left) edge of the bracket is 14.5 mm) from the marked edge of the range, as shown. A Wall Mounting A. #12 x 1⁵⁄₈" screws B. Anti-tip bracket A B B C A. #12 x 1⁵⁄₈" screws B. Anti-tip bracket 5. Using the Phillips screwdriver, mount anti-tip bracket to the wall or floor with the two #12 x 1⁵⁄₈" screws provided. A. Anti-tip bracket B. Mark edge of range. C 14.5 mm) 4. Drill two ¹⁄₈" (3.0 mm) holes that correspond to the bracket holes of the determined mounting method. See the following illustrations. 5