Maytag MER8875W Installation Instructions
Maytag MER8875W - 30 in. Ing Electric Range Manual
 |
UPC - 883049186870
View all Maytag MER8875W manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MER8875W manual content summary:
- Maytag MER8875W | Installation Instructions - Page 1
REQUIREMENTS 2 Tools and Parts 2 Location Requirements 2 Electrical Requirements 3 INSTALLATION INSTRUCTIONS 4 Unpack Range are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety - Maytag MER8875W | Installation Instructions - Page 2
instructions provided with any tools listed here. Tools needed • Tape measure • Level • Phillips screwdriver • Flat-blade screwdriver • Wrench or pliers • 3/8"nut driver • Drill • 1/8"(3.2 mm) drill bit Parts supplied Check that all parts mobile home installation. The appliance wiring will need to - Maytag MER8875W | Installation Instructions - Page 3
electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. Do not modify the power type of electrical connection you will be using and follow the instructions provided for it here. • Range must be connected to the - Maytag MER8875W | Installation Instructions - Page 4
supply end. Connectors on the appliance end must be provided at the point the power supply cord enters the appliance. This uses a 3-wire 1= Remove shipping materials, tape and film from range. 2. Remove oven racks and parts package from inside oven. 3. Do not remove the shipping base at this time. - Maytag MER8875W | Installation Instructions - Page 5
and be killed. Connect anti=tip bracket to rear range foot. Reconnect the anti=tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. 1. Remove the anti-tip bracket that is taped in the storage drawer. 2. Determine which - Maytag MER8875W | Installation Instructions - Page 6
cover screw located on the back of the range. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or electrical shock. 4. Add strain relief. Style 1: Power - Maytag MER8875W | Installation Instructions - Page 7
• In an area where local codes prohibit grounding through the neutral 1. Part of metal ground strap must be cut out and removed. A. Removable retaining rear of range. 6. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is - Maytag MER8875W | Installation Instructions - Page 8
3= Feed the power supply cord through the strain relief on the cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block. A B 3-wire connection: Power Supply Cord Use this method only if local codes permit connecting chassis ground conductor to - Maytag MER8875W | Installation Instructions - Page 9
: • New branch-circuit • Mobile homes installations (1996 NEC) • Recreational vehicles • In an area where local codes prohibit grounding through the neutral 1. Part of metal ground strap must be cut out and removed. G A. Terminal block B. Ground-link screw C. Cord/conduit plate D. Line 2 (red - Maytag MER8875W | Installation Instructions - Page 10
6. Use 3/8"nut driver to connect the neutral (white) wire to the center terminal block post with one of the #10-32 hex nuts. ..../.'L. G A 2. Attach terminal lugs to line 1 (black), bare (green) ground, and line 2 (red) wires. Loosen (do not remove) the set screw on the front of the terminal lug - Maytag MER8875W | Installation Instructions - Page 11
for specific instruction on range operation. If range does not operate, check the following: • Household fuse is intact and tight; or circuit breaker has not tripped. • Range is plugged into an outlet. • Electrical supply is connected. • See "Troubleshooting" in the Use and Care Guide. When the - Maytag MER8875W | Installation Instructions - Page 12
anti=tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. When anti-tip bracket. i Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
INSTALLATIONINSTRUCTIONS
30"(76.0 CM) FREESTANDINGELECTRICRANGES
TableofContents
RANGE SAFETY
.............................................................................
1
INSTALLATION
REQUIREMENTS
................................................
2
Tools
and
Parts
............................................................................
2
Location
Requirements
................................................................
2
Electrical Requirements
...............................................................
3
INSTALLATION
INSTRUCTIONS
..................................................
4
Unpack Range
..............................................................................
4
Install Anti-Tip
Bracket
.................................................................
5
Electrical Connection
...................................................................
6
Verify Anti-Tip
Bracket
Location
................................................
11
Level Range
................................................................................
11
Complete
Installation
..................................................................
11
Moving the Range
......................................................................
12
RANGE
SAFETY
Your safety and the safety of others are very important.
We have provided
many important
safety messages
in this manual and on your appliance.
Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol
alerts you to potential
hazards that can kill or hurt you and others.
All safety
messages
will follow the safety alert symbol and either the word "DANGER"
or "WARNING."
These words mean:
You can be killed or seriously
injured if you don't immediately
follow
instructions.
You can be killed or seriously
injured
if you don't
follow
instructions.
All safety messages
will tell you what the potential
hazard is, tell you how to reduce the chance
of injury, and tell you what can
happen
if the instructions
are not followed.
Tip Over
Hazard
A child
or adult
can
tip the range
and be killed.
Connect
anti=tip
bracket
to rear
range foot.
Reconnect
the anti=tip
bracket,
if
the
range
is
moved.
Failure
to follow
these
instructions
can result
in
death
or serious
burns
to children
and adults.
iMPORTANT:
Save for local electrical
inspector's
use.
W10258095A