Maytag MEW9630DS Use & Care Guide - Page 7

12/24 Hour The clock can be set to display time in a 12-hour or 24-hour format. The clock is factory preset for the 12-hour format. To Change the Clock to 24-Hour Format: 1. Press SETTINGS seven times. "12/24 HOUR" and "12HR. Press (1) for 24HR" will appear in the display text area. 2. Press the Temp/Time "1" keypad to change the 12/24 hour setting. 3. "24HR Selected" will scroll in the text area. The 12/24 hour setting has been changed. NOTE: A similar procedure can be done to return the 12/24 hour setting to 12HR. Sabbath Mode Sabbath Mode is used to configure the oven system so that certain features and modes are disabled or defeatured. By enabling Sabbath Mode, you will make the oven conform to Star-K Jewish Sabbath requirements. The oven is factory preset with Sabbath Mode Off. To Enable Sabbath mode: 1. Press SETTINGS eight times. "SABBATH" and "OFF. Press (1) for ON" will appear in the display text area. 2. Press the Temp/Time "1" pad to change the Sabbath setting. 3. "ON Selected" will scroll in the text area. The Sabbath setting has been changed. NOTE: A similar procedure can be done to return the Sabbath setting to OFF. 12-Hour Auto Off The oven control is factory preset to automatically shut off the oven 12 hours after the oven turns on. This will not interfere with any timed or delayed cook function. To Cancel 12-Hour Auto Off: 1. Press SETTINGS nine times. "12Hr AUTO_OFF" and "ON. Press (1) to OFF" will appear in the display text area. 2. Press the Temp/Time "1" pad to change the 12-hour auto off setting. 3. "OFF Selected" will scroll in the text area. The 12-hour auto off setting has been changed. NOTE: A similar procedure can be done to return the 12-hour auto off setting to ON. Language The Language is factory preset to English but can be changed to French or Spanish. To Change the Language to French: 1. Press SETTINGS 10 times. "LANGUAGE" and "ENGLISH. Appuyez sur 1 pour FRANÇAIS Sélectionné"" will appear in the display text area. 2. Press the Temp/Time "1" pad to change the language. 3. "FRANÇAIS Sélectionné" will scroll in the text area. The language has been changed. NOTE: A similar procedure can be done to return the language to English. Demo Mode Demo Mode is intended for sales floor demonstration. It should be Off for normal operation. While Demo Mode is active the oven will not heat. To turn off Demo Mode: 1. Press SETTINGS 11 times. "Demo Mode" and "ON. Press (1) to OFF" will appear in the display text area. 2. Press the "1" number keypad to change the Demonstration Mode setting to Off. 3. "OFF Selected" will scroll in the text area. Demo Mode has been turned Off. 4. Press SETTINGS 11 times then follow the display prompts to return the Demo Mode setting to On. Oven Temperature Control The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius. Temperature adjustment applies to upper or lower ovens. A minus sign means the oven will be cooler by the displayed amount. The absence of a minus sign means the oven will be warmer by the displayed amount. Use the following chart as a guide. ADJUSTMENT °F (ADJUSTMENT °C) COOKS FOOD 10°F (6°C) ...a little more 20°F (12°C) ...moderately more 30°F (18°C) ...much more -10°F (-6°C) ...a little less -20°F (-12°C) ...moderately less -30°F (-18°C) ...much less To Adjust Oven Temperature Calibration: For Single Ovens: 1. Press SETTINGS 12 times. "OVEN CALIBRATE. Press START" appears in the text area. 2. Press START to calibrate the oven. "Enter Offset: Press 1 to increase, 2 to decrease" will appear in the text area. 3. Press the Temp/Time "1" keypad to increase or the Temp/ Time "2" keypad to decrease the temperature in 5°F (3°C) increments. The adjustment can be set between 30°F (18°C) and -30°F (-18°C). 4. Press START to save the adjustment and exit the Temperature Calibration menu. For Double Ovens: 1. Press SETTINGS 12 times. "TEMP CALIB" and "UPPER CALIBRATE. Press START or Press 1 for Lower calibrate" appears in the text area. 2. Press the "1" keypad to toggle between upper and lower oven calibration. 3. Press START to calibrate the selected oven. "Enter Offset: Press 1 to increase, 2 to decrease" will appear in the text area. 4. Press the Temp/Time "1" keypad to increase or the Temp/ Time "2" keypad to decrease the temperature in 5°F (3°C) increments. The adjustment can be set between 30°F (18°C) and -30°F (-18°C). 5. Press START to save the adjustment and exit the Temperature Calibration menu. 7