Maytag MEW9630FZ Use & Care Guide - Page 12
General Cleaning, Oven Lights, Troubleshooting - installation
View all Maytag MEW9630FZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. Press the number keypads to enter the desired amount of time by which you want to delay the start. 4. Press SELF CLEAN. 5. Choose the clean level desired by pressing the appropriate number keypad as instructed by the scrolling text. 6. Press START for the selected oven. The oven doors will automatically lock after the Delay Start countdown. When the Self-Cleaning cycle is complete and the oven cools, the oven doors will unlock. 7. When the oven is completely cooled, remove ash with a damp cloth. General Cleaning IMPORTANT: Before cleaning, make sure all controls are OFF and the oven is cool. Always follow label instructions on cleaning products. For additional information, you can visit the Frequently Asked Questions (FAQs) section of our website at www.maytag.com. In Canada, refer to the Customer Service section at www.maytag.ca. Soap, water, and a soft cloth or sponge are suggested first unless otherwise noted. EXTERIOR PORCELAIN ENAMAL SURFACES Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire oven is cool. These spills may affect the finish. Cleaning Method: ■■ Glass cleaner, mild liquid cleaner, or nonabrasive scrubbing pad: Gently clean around the model/serial/rating plate because scrubbing may remove numbers. ■■ affresh® Kitchen and Appliance Cleaner Part Number W10355010 (not included): See the "Accessories" section for more information. STAINLESS STEEL (On Some Models) NOTE: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, steel-wool pads, gritty washcloths, or abrasive paper towels. Damage may occur to stainless steel surfaces, even with one-time or limited use. Cleaning Method: Rub in direction of grain to avoid damaging. ■■ affresh® Stainless Steel Cleaner Part Number W10355016: See the "Accessories" section for more information. METALLIC PAINT (On Some Models) Do not use abrasive cleaners, cleaners with bleach, rust removers, ammonia, or sodium hydroxide (lye) because paint surface may stain. CONTROL PANEL AND OVEN DOOR EXTERIOR To avoid damage to the control panel, do not use abrasive cleaners, steel-wool pads, gritty washcloths, or abrasive paper towels. Cleaning Method: ■■ Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on panel. ■■ affresh® Kitchen and Appliance Cleaner Part Number W10355010 (not included): See the "Accessories" section for more information. OVEN RACKS Cleaning Method: ■■ Steel-wool pad. ■■ For racks that have discolored and are harder to slide, a light coating of vegetable oil applied to the rack guides will help them slide. OVEN CAVITY Do not use oven cleaners. Food spills should be cleaned after the oven cools. At high temperatures, foods react with porcelain, and staining, etching, pitting, or faint white spots can result. Cleaning Method: ■■ Self-Cleaning cycle: See the "Self-Cleaning Cycle" section first. Oven Lights The oven light(s) are standard 40-watt appliance bulbs. Before replacing, make sure the oven is cool and the controls are turned off. To Replace: 1. Disconnect power. 2. Turn the glass bulb cover in the back of the oven counterclockwise to remove. 3. Turn bulb counterclockwise to remove from socket. 4. Replace bulb, and then bulb cover by turning clockwise. 5. Reconnect power. TROUBLESHOOTING First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the warranty page in this manual and scan the code there with your mobile device, or visit http://www.maytag.com/product_help. In Canada, visit http://www.maytag.ca. Contact us by mail with any questions or concerns at the address below: In the U.S.A.: In Canada: Maytag Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692 Maytag Brand Home Appliances Customer eXperience Centre 200 - 6750 Century Ave. Mississauga, Ontario L5N 0B7 Please include a daytime phone number in your correspondence. PROBLEM Nothing will operate POSSIBLE CAUSES AND/OR SOLUTIONS Oven isn't wired properly: See the Installation Instructions. Household fuse is blown or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. The control displays an F9 or F9 E0 error code: The electrical outlet in the home may be miswired. Contact a qualified electrician to verify the electrical supply. 12